N7201A652E.pdf - 第453页

NPM- TT2 EJM1E E-MB-05O-05 Button Action A ＋ Moves a pallet to the supply position. Moves a pallet to the pickup p osition. Stores a pallet to the magazine. Draws out a pallet from the magazine. Replaces a magazine. Unlo…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
Unit
adjust-
ment
Tray feeder action
check
5-2-13-1
1
A C DB
A
B
D
You can check actions of each function in a tray feeder.
2
C
1
2
E
Operating procedure
5-2-13
Lifter position
Pallet number on Lifter.
If the above button is pressed after
selecting the [Lifter position] or [Supply
position, [None] is shown in the
corresponding field.
Selected pallet
Selected pallet number.
●The ejection pallet is displayed as [21].
Supply position
Pallet number at Supply position.
Choose a pallet
Check action
NPM-TT2 EJM1EE-MB-05O-05
Button Action
A＋
Moves a pallet to the
supply position.
Moves a pallet to the
pickup position.
Stores a pallet to the
magazine.
Draws out a pallet from
the magazine.
Replaces a magazine.
Unlocks a magazine cover.
Opens the supply shutter.
Closes the supply shutter.
Opens the magazine
shutter.
Closes the magazine
shutter.
Turns ON the lamp.
Turns OFF the lamp.
5-2-13-2
E
+
+
●
■To change a pallet moving speed
Choose a pallet moving
speed.
■To perform other actions
■How to view the table below (*when opening the supply shutter)
(the supply shutter)
System
administration
NPM-TT2 EJM1EE-MB-05O-05
5-3-1
Machine
parame-
ter
XY origin offset/XY
standard mark check
A
B
設備に設置されているフィーダーのメモリー情報を表示します。
XY origin offset
You can check the origin offset values (calibration result) of X-/Y-axes.
XY standard mark
You can check the offset value (calibration result) to move the head to the XY standard mark position.
●For dual conveyor, you need to choose a lane in advance.
B
A
A
A
Operating procedure
5-3-1
Origin offset X[mm]/Y[mm]
The criterion for X-/Y-axes actions and
the origin offset value of each axis.
Install X[mm]/Y[mm]/Z[mm]
The criterion for X-/Y-axis actions that is
used in installing the head, and the
origin offset value of each axis.
Standard mark coordinates
X[mm]/Y[mm]
XY coordinate offset of the standard
mark of the transfer conveyor.
■For dual conveyor
(Select a lane in advance)