N7201A652E.pdf - 第461页

NPM- TT2 EJM1E E-MB-05O-05 You can check the coefficient to apply the pl acemen t load of the head set in Load teachin g ( → [Maintenance] P. 12- 8-1 ). ● It is available only for 3-nozzle head. 5-3-7 Machine parame- ter…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
Nozzle position
Offset of the selected nozzle is displayed
in .
5-3-6
Machine
parame-
ter
C
B
設備に設置されているフィーダーのメモリー情報を表示します。
Checking offset per head angle
You can check the X/Y/θ element offset values (calibration result) per head θ rotation angle.
B CA
A
Checking height direction offset of the changer
You can check the nozzle changer height offset (calibration result).
B
C
D
D
A
Operating procedure
5-3-6
Offset per head angle
X[mm]/Y[mm]/ θ[°]
Offset values of X/Y coordinates and θ.
or
Switches to the line camera data.
● is used for the 8-/3-nozzle
heads.
Nozzle changer height Z[mm]
Height direction offset of the nozzle
changer.
Coordinates of A/B points
X[mm]/Y[mm]
Component selection
Offset per head angle
/changer height check
A
C
B
A
Display switch
Switches parameter display of the
nozzle changer for placement (Mount) or
the nozzle changer for support pins
(Support)
NPM-TT2 EJM1EE-MB-05O-05
You can check the coefficient to apply the placement load of the head set in Load teaching
(→[Maintenance] P. 12-8-1 ).
●It is available only for 3-nozzle head.
5-3-7
Machine
parame-
ter
Head placement load
coefficient check
A
AB
B
Operating procedure
5-3-7
Load coef
Load coefficients A and B per nozzle
position.
Stroke end
Stroke end per nozzle position.
System
administration
NPM-TT2 EJM1EE-MB-05O-05
5-3-8
Machine
parame-
ter
Conveyor origin offset
check
A
A
B
B
Checking origin offset
Checking PCB stop position offset
A
A
You can check conveyor origin offset (calibration result) and PCB stop position offset.
●For dual conveyor, you need to choose a lane in advance.
Operating procedure
5-3-8
Width axis
Conveyor width offset.
Trans offset X[mm]/Y[mm]
Offset to calibrate an error occurring in
conveyor unit assembly.
PCB stop position offset
X[mm]/Y[mm]
■For dual conveyor
(Select a lane in advance)