N7201A652E.pdf - 第96页
NPM- TT2 EJM1EE-MB -02O-04 Engineer mode 1 2-2-2 -5 Production start Starts automatic production. Production menu (Before production) Conditional placement Placement Feeder Head Clear Specifies targe ts for placement by …
NPM-TT2 EJM1EE-MB-02O-04
Maintenance
operations
Consumable parts replacement
Periodic inspection
Checks the inspection items and work history of each cycle.
Displays the consumable parts replacement information.
Accuracy verification result
Displays accuracy verification results.
Maintenance
menu
XY unit
Carries out maintenance operations on XY unit.
Head
Carries out maintenance operations on heads.
Carries out maintenance operations on PCB transfer.
Tray
Carries out maintenance operations on the tray feeder.
(Displayed when the tray feeder is installed)
NOTICE
You can handle of the first layer in the customized Operator mode.
2-2-2-4
Preparation
Conveyor
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
Engineer mode 1
2-2-2-5
Production start
Starts automatic production.
Production
menu
(Before
production)
Conditional
placement
Placement
Feeder
Head
Clear
Specifies targets for placement by the pattern.
Specifies targets for placement by the placement point.
Specifies targets for placement by the part.
Specifies targets for placement by the head.
Clears the conditions specified.
Pattern
Soft switch for adjustment use
Temporarily changes operating environment to debug the machine.
Compo-
nent
names
Menu configuration 3
Tray
Specifies targets for placement by the tray.
Operating procedure
2-2-2
Changes the operation mode.
Operation mode change
Home menu
Edits the operation mode.
Operation mode edit
*1)
*2)
*1)・For single lane mode
・For alternate mode on the dual lane mode
*2)・For independent mode on the dual lane mode
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-6
Remaining monitor
Checks information on the component shortage of each table in line.
Checks pickup status.
Pickup monitor
Status monitor
Displays production information during operations, parts shortages and
other status.
Production
menu
(During
production)
Continuous preparation
Controls individual preparation before production, per process.
Handles files; for example, loading machine data or saving machine parameters.
File handling
Material
preparation
Preparation
menu
Displays the machine data at each nozzle position.
Nozzle
Feeder
Tray
Displays production data and the
feeder status in color.
Checks feeder status.
Checks the correction values
obtained from pickup position learning
during production, per feeder address.
Operates the transcription unit.
(displayed when the transcription unit is mounted)
Checks production data and the tray
status in color.
Checks tray status.
Checks the correction values
obtained from pickup position learning
during production, per tray address.
Preparation
First layer Second layer Third layer Fourth layer