N7201A652E.pdf - 第273页
NPM- TT2 EJM1EE-MB -04O-03 The offset data of lamp value is initialized. 1 Checking and editing the recognition condition 4-1-9 -2 C B Item name Set data Mount condition of each item. D A CompName (→P.4-1-8 -1 ) Edit the…
NPM-TT2 EJM1EE-MB-04O-03
Data
editing
Describes how to check and edit the mount condition data for the components registered in each feeder
address.
C
B
Item name
Set data
Mount condition of each item.
Checking and editing pickup, mount, nozzle condition
Placement condition
data edit
D
Switching condition setting
●
●
●
●
Please see the Operating manual of NPM-DGS for setting of each item.
NOTICE
A
CompName
(→P.4-1-8-1)
Edit the data of the desired
field on the screen
●Touching the screen opens the input
window.
1
Operating procedure
4-1-9
D B C
A
●
This is displayed only if ‘Vertical line
camera measurement’ in the unit
setting is set to ‘ON’. (→P.5-1-1）
4-1-9-1
NPM-TT2 EJM1EE-MB-04O-03
The offset data of lamp value is
initialized.
1
Checking and editing the recognition condition
4-1-9-2
C
B
Item name
Set data
Mount condition of each item.
D
A
CompName
(→P.4-1-8-1)
Edit the data of the desired
field on the screen
●Touching the screen opens the input
window.
2
Ｓｅｔｔｉｎｇ
change
1 B CD
A
Recog. Speed:
・(Auto / Fast / Mid / Slow)
Recog error stop:
・(1 / 3)
Camera kind：
・(2D / 3D)
Lighting mode：
・(Shadow / Reflect / BGA)
Shadow lamp offset：
・Shadow lamp offset value for component
recognition
Reflect lamp offset：
・Reflect lamp offset value for component recognition
BGA lamp offset：
・BGA lamp offset for component recognition
polarity：
・The presence / absence of component polarity
Chk adhesion around the parts：
・Picking up 2 components results in a recognition
error. Prevents an extra component from falling on a
PCB.
NPM-TT2 EJM1EE-MB-04O-03
Data
editing
Describes how to check and edit tray information.
B
CD E F G
Tray data edit
(tray feeder)
AH
A
CompName
(→P.4-1-8-1)
B
Tray
Tray name.
C
Basic information
(→P.4-1-10-2)
Choose a moving speed of pallet axis.
D
Pallet axis speed
E
Lifter axis speed
Choose a moving speed of lifter-axis.
●Choose the same set data as .
D
F
Tray thickness
G
Pickup height
Tray
Electric
component
Pickup
height
Enter the pickup height.
Edit the data of the desired
field on the screen
●Touching the screen opens the input
window.
1
Operating procedure
4-1-10
4-1-10-1