Dek-265GSX-User-Manual.pdf.pdf - 第158页

The value of the configuration parameter cleaner type is set to silver and this parameter is written to the configuration file. 4. Press Exit . To enable the Vortex under screen cleaner carry out the following: 1. Press …

100%1 / 388
To enable the blue under screen cleaner carry out the following:
1.
Press the function key F10 on the keyboard, a window of the following form
is displayed:
NOTE
If the Vortex under screen cleaner is currently enabled, carry out disabling the
Vortex under screen cleaner.
2.
Type bluon using the keyboard.
3.
Press Enter, the message ‘Blue Under-Screen Cleaner Enabled’ is
displayed in the message prompt bar.
4.
Press Exit.
To disable the blue under screen cleaner carry out the following:
1.
Press the function key F10 on the keyboard, a window of the following form
is displayed:
2.
Type bluoff using the keyboard.
3.
Press Enter, the message ‘Blue Under-Screen Cleaner Disabled’ is
displayed in the message prompt bar.
The silver under screen cleaner becomes the current cleaner and all cleaner
parameters revert to being appropriate to the previous cleaner.
Software Version 6 User Manual 2.23
SET PREFERENCES
PREFERENCES
EntertoClose...
Serial Number
Processor Type
Executable date
Executable time
Executable name
Software Version
Options Enabled
Comms Driver
DOS Memory
Free DOS Memory
Available RAM
:
:
:
:
:
:
:
:
:
:
:
201305
486DX - or higher
April 19 1999
10:57:38
RR0400.EXE
04.00
SBNG
TCP
512 kb
316 kb
3223 kb
DEK 265 GS
(
X
)
Enter to Close ...
Serial Number
Processor Type
Executable date
Executable time
Executable name
Software Version
Options Enabled
Comms Driver
DOS Memory
Free DOS Memory
Available RAM
:
:
:
:
:
:
:
:
:
:
:
201305
486DX - or higher
April 19 1999
10:57:38
RR0400.EXE
04.00
SBNG
TCP
512 kb
316 kb
3223 kb
DEK 265 GS
(
X
)
The value of the configuration parameter cleaner type is set to silver and this
parameter is written to the configuration file.
4.
Press Exit.
To enable the Vortex under screen cleaner carry out the following:
1.
Press the function key F10 on the keyboard, a window of the following form
is displayed:
2.
Type vorton using the keyboard.
3.
Press Enter, the message ‘Vortex Under-Screen Cleaner Enabled’ is
displayed in the message prompt bar.
The Vortex under screen cleaner becomes the current cleaner and all cleaner
parameters become appropriate to the Vortex cleaner.
The value of the configuration parameter cleaner type is set to Vortex and
this parameter is written to the configuration file.
4.
Press Exit.
To disable the Vortex under screen cleaner carry out the following:
1.
Press the function key F10 on the keyboard, a window of the following form
is displayed:
2.24 User Manual Software Version 6
SET PREFERENCES
PREFERENCES
Enter to Close ...
Serial Number
Processor Type
Executable date
Executable time
Executable name
Software Version
Options Enabled
Comms Driver
DOS Memory
Free DOS Memory
Available RAM
:
:
:
:
:
:
:
:
:
:
:
201305
486DX - or higher
April 19 1999
10:57:38
RR0400.EXE
04.00
SBNG
TCP
512 kb
316 kb
3223 kb
DEK 265 GS
(
X
)
Enter to Close ...
Serial Number
Processor Type
Executable date
Executable time
Executable name
Software Version
Options Enabled
Comms Driver
DOS Memory
Free DOS Memory
Available RAM
:
:
:
:
:
:
:
:
:
:
:
201305
486DX - or higher
April 19 1999
10:57:38
RR0400.EXE
04.00
SBNG
TCP
512 kb
316 kb
3223 kb
DEK 265 GS
(
X
)
2.
Type vortoff using the keyboard.
3.
Press Enter, the message ‘Vortex Under-Screen Cleaner Disabled’ is
displayed in the message prompt bar.
The silver under screen cleaner becomes the current cleaner and all cleaner
parameters revert to being appropriate to the previous cleaner.
The value of the configuration parameter cleaner type is set to silver and this
parameter is written to the configuration file.
4.
Press Exit.
Paste Trails Provides the capability to reduce solder paste trails from squeegees
automatically, options are:
Disabled; Mode 1
Ifmode1 is selected, any paste that has dripped from the squeegeeis scooped up,
by the squeegee back to the paste roll. This process occurs at the start of every
stroke, with the print mode set to print/print and at the start of only the print
stroke, when the print mode is set to flood/print orprint/flood.
Transport Wait
Mode
This option enables the product to be held in contact with the screen until both
upline and downline systems are ready to transfer, options are:
Standard; Hold_at_Print
The default is Standard.
Clamp Type Sets the type of board clamp used, options are:
Board Clamp; Snuggers
The default is Board Clamp.
To eliminate vacuum seal loss during alignment, if the Snuggers option is
selected and the tooling type is Vacuum, the rails do not dip when the camera is
traversing.
Snugger Thickness This Set Preference appears if Snuggers has been selected from the Clamp Type
preference
Min 0.8mm
Max2.0mm (2.01mm is displayed but 2.0mm is the maximumvalueselectable)
Increments 0.1mm
The default is 1.6mm.
Tooling Monitoring This parameter sets, while Feature Licensing asserts that use of Tooling
Deviation Monitoring is authorized, the frequency (in boards printed) at which
monitoring is performed. Monitoring is also carried out on the first print stroke
of a print run.
Min 0 boards (Tooling Monitoring disabled)
Max 200 boards
Increments 1
Software Version 6 User Manual 2.25
SET PREFERENCES
PREFERENCES