Dek-265GSX-User-Manual.pdf.pdf - 第334页

The following window is displayed: 3. Use the Next and Previous keys (F4 - F5) to highlight the screen clean rate. Next Previous 4. Use the Incr . and Decr . keys (F6 -F7) to set the screen clean rate. This can be set at…

Clean Screen Modes

These parameters determine the modes of operation for the screen cleaner. Each

mode can have a cleaning sequence with up to six sweeps, each of which can be

set to VAC, DRY, WET or NONE.

Sweeps set with NONE option cause no action to be taken during the sequence.

For example, the settings:

DRY, NONE, NONE, DRY, NONE, WET and

DRY, DRY, WET, NONE, NONE, NONE

Both carry out two consecutive operations, directly followed by one WET

cleaning operation.

The default setting is NONE for all six steps.

Solvent Advice The following solvents MUST NOT be used in the underscreen cleaner.

However, this list is not complete and does not mean that any solvent not

mentioned is compatible, with DEK machines.

• Rosstech 106 FE

• Rosstech 162 ND

• Acetone

DEK are continuously evaluating alternative solvents. If you wish to use a

particular type of solvent, but are unsure of its suitability for DEK machines,

please contact the DEK Customer Support Group.

NOTE

Rosstech 147FD is used within DEK manufacturing division and has been found

to be compatible with DEK underscreen cleaner units. If you are unsure about a

particular solvent please contact DEK Customer Support Group.

Press Setup (F6).

Setup

Press Edit Data (F3).

Edit

Data

Software Version 6 User Manual 9.19

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

The following window is displayed:

Usethe Next and Previouskeys (F4 - F5)tohighlightthescreen clean rate.

Next Previous

Use the Incr. and Decr. keys (F6 -F7) to set the screen clean rate. This can

be set at any number between 0 and 200 in increments of 1.

Incr. Decr.

Use the Previous key (F5) to highlight the screen clean mode. This

parameter determines the mode of operation of the screen cleaner.

Press the Incr. or Decr. keys (F6 - F7) to enter the screen clean mode.

Incr. Decr.

9.20 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

The Screen Clean Mode window is displayed:

Use the Left and Right keys (F2 - F3) to highlight the next sweep number to

be changed.

Left Right

Use the Incr. andDecr.keys (F6- F7)to select theoperation required for the

highlighted sweep. The four options are: VAC, DRY, WET and NONE.

Incr. Decr.

9. If the six stage sequence is setup as required, go to the next step, otherwise

return to Step 7.

10.

Press Exit (F8).

Exit

11.

Press Exit (F8).

Exit

Paper and Solvent

Replenishment

Paper and solvent replenishment can take place with the cleaner unit in the

printer. When paper or solvent needs replenishment a warning window is

automatically displayed on themonitor. The warningwindow varies,depending

on the setting of the consumable action option in set preferences. The message

in the warning window depends on whether the solvent or paper or both require

replenishment. The procedure varies, depending on whether the replenishment

is prior to a print run or during a print run.

Replenishment Prior to a Print Run:

If the set preference is set to warn, continue with Step 1. If the set preference is

set to pause or suspend go to Step 4.

Software Version 6 User Manual 9.21

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

Screen Clean Mode 1

WET

DRY

NONE

Sweep Number