Dek-265GSX-User-Manual.pdf.pdf - 第223页
Cartridge in Down Position Continuously displays the current status of the cartridge away (down) sensor. Cartridge in Up Position Continuously displays the current status of the cartridge home (up) sensor. Software Versi…
PASTE DISPENSE SYSTEM
The Paste Dispense System diagnostic module contains the following:
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Carriage Home Drives the dispense carriage left to find its datum position as determined by its
datum sensor.
Drive Carriage to
Start Position
Drives the paste carriage to the position set by the paste start parameter.
Drive Carriage to
End Position
Drives the paste carriage to the position set by the paste stop parameter.
Drive Cartridge
Down
Drivesthe cartridge tilt down until the cartridge away (down)sensorisdetected.
Drive Cartridge Up Drives the cartridge tilt up until the cartridge home (up) sensor is detected.
Toggle Paste
Dispense
Alternately energizes the paste dispense, displaying On status and de-energizes
displaying Off status.
Paste Cartridge
Empty
Continuously displays the current status of the cartridge empty sensor.
5.28 User Manual Software Version 6
DIAGNOSTICS
PASTE DISPENSE SYSTEM
Paste D
i
spense System D
i
agnost
i
cs
Paste Cartridge Empty
Cartridge in Down Position
Cartridge in Up Position
ON
ON
OFF
OFF
Carriage Home
Drive Carriage To Start Position
Drive Carriage To End Position
Drive Cartridge Down
Drive Cartridge Up
Toggle Paste Dispense
Cartridge in Down
Position
Continuously displays the current status of the cartridge away (down) sensor.
Cartridge in Up
Position
Continuously displays the current status of the cartridge home (up) sensor.
Software Version 6 User Manual 5.29
DIAGNOSTICS
PASTE DISPENSE SYSTEM
SCREEN ALIGNMENT
The Screen Alignment module contains the following:
Home Actuator
Drive X Forward Motor Using Jog Buttons
Drive X Rear Motor Using Jog Buttons
Drive Y Motor Using Jog Buttons
Toggle Chase Clamp on/off
Cycle Alignment System
Cycle Count Done: 0 To go: 50
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Incr.
Next/Previous keys have no function in this application.
Incr./Decr. keys change the value of the cycle count.
Exit returns operation to the screen alignment diagnostics page.
Home Actuator Selecting this option drives the X forward, X Rear and Y Axis actuators
simultaneously to find their datum positions as determined by their datum
sensors.
Drive X Forward
Motor Using
Jog Buttons
Selecting this option enables the right Jog button to drive the X forward actuator
right at slow speed and the left Jog button to drive it left, stopping immediately
the button is released.
5.30 User Manual Software Version 6
DIAGNOSTICS
SCREEN ALIGNMENT
Actuator Cycle Test Parameters
CYCLE COUNT
50.0
Cycles