Dek-265GSX-User-Manual.pdf.pdf - 第29页

7. Fit the front squeegee onto the front squeegee mount, ensuring that the thumbscrews are only finger tight. 8. Lower the front printhead cover. 9. Press the System button. 10. Select Continue (F1). Continue Software Ve…

The front and rear squeegees must be fitted in the correct positions. Each

squeegee has a keyway machined into it to ensure that it cannot be incorrectly

fitted.

6. Fit the rear squeegee onto the rear squeegee mount, tightening the

thumbscrews until they are finger tight.

1.12 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 4A

NOTE

To prevent incorrect orientation when fitting squeegees, the locking screws on

the rear squeegee are positioned wider apart than those on the front

squeegee. Keyway slots are also in different positions.

Rear Squeegee

Front Squeegee

Rear Squeegee (Front View)

Front Squeegee (Front View)

Squeegee Blade Squeegee Holder

Locking Screw Keyway

Locking Screw

FittoRear

Squeegee Mount

FittoFront

Squeegee Mount

Side View of Squeegee

and Squeegee Mounts

Side View of Squeegee

and Squeegee Mounts

7. Fit the front squeegee onto the front squeegee mount, ensuring that the

thumbscrews are only finger tight.

8. Lower the front printhead cover.

Press the System button.

10.

Select Continue (F1).

Continue

Software Version 6 User Manual 1.13

MACHINE PROGRAMMING

STAGE 4A

11.

Select Calibrat Heights (F2). The message ‘Ensure that the correct

squeegees are fitted’ is displayed.

Calibrat

Heights

12.

Select Continue (F1). The message ‘Calibrating pressure heights - DO

NOT Open Covers !’ is displayed.

Continue

13.

Select Exit (F8).

Exit

14.

Select Exit (F8).

Exit

1.14 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 4A