Dek-265GSX-User-Manual.pdf.pdf - 第368页

20. To gain access to the transfer head (1), release the latch on the front of the pressure mechanism (2) and raise the mechanism forward and upwards to engage the spring locking device. NOTE Numbers in brackets refer to…

16.

Select Use (F1).

Use

17.

Select Exit (F8).

Exit

18.

Select Proceed (F1).

Proceed

The ProFlow unit is placed in contact with the screen.

19. Open the front printhead cover.

Software Version 6 User Manual 9.53

CONSUMABLE REPLENISHMENTS

PROFLOW

20. To gain access to the transfer head (1), release the latch on the front of the

pressure mechanism (2) and raise the mechanism forward and upwards to

engage the spring locking device.

NOTE

Numbers in brackets refer to figure below.

21. To release the carrier from the transfer head, unscrew the thumbscrews (1) at

each end of the carrier to loosen the clamp brackets. Hinge the clamp

brackets (2) outwards. Hinge the carrier and ProFlow cassette (3) towards

the front of the machine exposing the top of the ProFlow cassette.

NOTE

Numbers in brackets refer to figure below.

9.54 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

PROFLOW

22. Carefully remove the empty ProFlow cassette (1) from the carrier (2) by

lifting the ProFlow cassette clear of the retaining pins (3) sited at each end of

the carrier unit.

NOTE

Numbers in brackets refer to figure below

23. Disposeof the empty cassette in accordance with local authority guidelines.

24. Fit a new cassette (1) into the carrier recess (2) and secure into place with the

retaining pins (3).

NOTE

Numbers in brackets refer to figure below.

Software Version 6 User Manual 9.55

CONSUMABLE REPLENISHMENTS

PROFLOW