Dek-265GSX-User-Manual.pdf.pdf - 第67页
39. Press the System button. 40. Select Exit (F8). Exit 41. Go to Stage 7. Software Version 6 User Manual 1.51 MACHINE PROGRAMMING STAGE 6D
33.
Select Raise Head (F2).
Raise
Head
34. Raise the printhead using two button control. Fit the head prop.
35.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
36. Remove the board from the rails.
37.
Select Head (F2).
Head
38. Remove the head prop. Lower the printhead using two button control.
1.50 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6D
39.
Press the System button.
40.
Select Exit (F8).
Exit
41. Go to Stage 7.
Software Version 6 User Manual 1.51
MACHINE PROGRAMMING
STAGE 6D
STAGE 6E
Tooling Setup - AutoFlex
The correct pins for each product are selected automatically when the board size
parameters are programmed into the board file. If the pin configuration needs to
be changed, for example if a support pin coincides with the position of an
underside component and needs to be removed, from the setup page:
1.
Select Change Tooling (F6).
Change
Tooling
The Change Tooling Parameters window is displayed:
The parameters are not active.
2.
Select Adjust (F1). The parameters are now active.
Adjust
3.
Select Change Autoflex (F1).
Change
Autoflex
1.52 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6E
Change Tooling Parameters
BOARD WIDTH
BOARD STOP X
BOARD STOPY
216.0
125.0
142.6
mm
mm
mm