Dek-265GSX-User-Manual.pdf.pdf - 第63页
14. Select Board Width (F5). Board Width 15. Select Board Stop (F4). The camera moves to the board stop position. The board stop on the camera extends. 16. Select Raise Head (F2). Raise Head 17. Raise the printhead using…
10. TheMultiFlextoolingcannowbefittedintotheappropriatelocationholesin
the tooling plate. Ensure that the tooling is placed into the correct set of
holes, taking regard of the type of screen being used and hence the position
of the fixed rail.
11.
Select Head (F2).
Head
12. Remove the head prop. Lower the printhead using two button control.
13.
Press the System button.
1.46 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6D
14.
Select Board Width (F5).
Board
Width
15.
Select Board Stop (F4).
The camera moves to the board stop position. The board stop on the camera
extends.
16.
Select Raise Head (F2).
Raise
Head
17. Raise the printhead using two button control. Fit the head prop.
18.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
19. Slide a board along the rails to abut the board stop.
20.
Select Board Clamps (F3), to close the clamps.
Board
Clamps
Software Version 6 User Manual 1.47
MACHINE PROGRAMMING
STAGE 6D
21.
Select Head (F2).
Head
22. Remove the head prop. Lower the printhead using two button control.
23.
Press the System button.
24.
Select Home Camera (F4).
Home
Camera
25.
Select Print Height (F7).
Print
Height
26.
Select Raise Head (F2).
Raise
Head
1.48 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6D