Dek-265GSX-User-Manual.pdf.pdf - 第49页
16. Select Head (F2). Head 17. Remove the head prop. Lower the printhead using two button control. 18. Press the System button. 19. Select Home Camera (F4). Home Camera 20. Select Print Height (F7). Print Height 21. Sele…
9.
Select Board Width (F5).
Board
Width
10.
Select Board Stop (F4).
The camera moves to the board stop position. The board stop on the camera
extends.
11.
Select Raise Head (F2).
Raise
Head
12. Raise the printhead using two button control. Fit the head prop.
13.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
14. Slide a board along the rails to abut the board stop.
15.
Select Board Clamps (F3), to close the clamps.
Board
Clamps
1.32 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6B
16.
Select Head (F2).
Head
17. Remove the head prop. Lower the printhead using two button control.
18.
Press the System button.
19.
Select Home Camera (F4).
Home
Camera
20.
Select Print Height (F7).
Print
Height
21.
Select Raise Head (F2).
Raise
Head
Software Version 6 User Manual 1.33
MACHINE PROGRAMMING
STAGE 6B
22. Raise the printhead using two button control. Fit the head prop.
23. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
24.
Select Head (F2).
Head
25. Remove the head prop. Lower the printhead using two button control.
26.
Press the System button.
27.
Select Home Position (F7).
Home
Position
1.34 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6B