Dek-265GSX-User-Manual.pdf.pdf - 第370页

25. Remove the sealing foil from the top of the new ProFlow cassette. 26. Hinge the clamp brackets (1) inwards to position the cassette onto the transfer head, secure in place by tightening the thumbwheels (2). 27. Lower…

100%1 / 388
22. Carefully remove the empty ProFlow cassette (1) from the carrier (2) by
lifting the ProFlow cassette clear of the retaining pins (3) sited at each end of
the carrier unit.
NOTE
Numbers in brackets refer to figure below
23. Disposeof the empty cassette in accordance with local authority guidelines.
24. Fit a new cassette (1) into the carrier recess (2) and secure into place with the
retaining pins (3).
NOTE
Numbers in brackets refer to figure below.
Software Version 6 User Manual 9.55
CONSUMABLE REPLENISHMENTS
PROFLOW
3
1
2
3
1
2
25. Remove the sealing foil from the top of the new ProFlow cassette.
26. Hinge the clamp brackets (1) inwards to position the cassette onto the
transfer head, secure in place by tightening the thumbwheels (2).
27. Lower the pressure mechanism (3) in place until the latch engages.
NOTE
Numbers in brackets refer to figure below.
28. Close the printhead cover.
29.
Press the System button.
9.56 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PROFLOW
2
2
1
3
30.
Select Setup ProFlow (F4).
Setup
ProFlow
31.
Select Prime ProFlow (F6).
Prime
ProFlow
If it is possible to carry out the prime ProFlow function the message
‘Performing knead off-image.’ is displayed. If it is not possible the
function is deferred until it is, ie at the start of a print stroke with a board
loaded.
32.
Select Exit (F8).
Exit
33.
Select Exit (F8).
Exit
During a Print Run When the ProFlow cassette needs replenishment a warning window is
automatically displayed on themonitor. The warningwindow varies,depending
on the setting of the consumable action option in set preference.
If the set preference is set to warn, continue with Step 1. If the set preference is
set to pause go to Step 6. If the set preference is set to suspend go to Step 11.
1. If the set preference is set to warn, the following window is displayed:
The tricoloured beacon shows amber/green.
2.
Select Confirm (F1).
Confirm
Software Version 6 User Manual 9.57
CONSUMABLE REPLENISHMENTS
PROFLOW