Dek-265GSX-User-Manual.pdf.pdf - 第19页

3. Use the Left, Right, Up or Down function keys (F4 - F7) to highlight the required file. Left Right Up Down 4. Press Load (F1). Load 5. Initialize the machine by pressing the System button. The selected file is now dis…

100%1 / 388
STAGE 1 For machines with the remote board stop option, ensure that the machine is
correctly configured for the intended product. Carry out the appropriate one of
the following procedures:
• Camera to Remote Board Stop - LHS Configuration
• Camera to Remote Board Stop - RHS Configuration
• Remote Board Stop - LHS to RHS Configuration
• Remote Board Stop - RHS to LHS Configuration
• Remote Board Stop - Same Side Configuration
• Remote Board Stop to Camera Board Stop
See Technical Reference Manual, Rising Table Module Chapter, Replacement
Procedures, for the first five procedures and Technical Reference Manual,
Camera and Vision System Module Chapter, Replacement Procedures for the
Remote Board Stop to Camera Board Stop procedure.
Power Up and
Log On
1.
Turn the main isolator switch to On.
2.
When the message ‘Press SYSTEM Switch To Initialize Printer or Select
Diagnostics or Load Data’ is displayed in the message prompt bar, either:
a) Select Load Data (F2) if the loaded product is unknown or needs to be
changed.
b) Go to Step 5 if the loaded product file is known to be the correct one.
Load
Data
The Load Data File window is displayed:
1.2 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 1
265 Test 1
Load Data File
10x10
265 Test 1
Apple
Calibra
Default
Dek 04
Dek 03
Test 1
Xray
Search
265 Test 1
Product ID
3.
Use the Left, Right, Up or Down function keys (F4 - F7) to highlight the
required file.
Left Right Up Down
4.
Press Load (F1).
Load
5.
Initialize the machine by pressing the System button.
The selected file is now displayed on the status page.
The operator can change the language used in the display menus.
To select a different language continue with Step 6. If the correct language is
loaded go to Step 12.
6.
From the status page displayed, select Setup (F6).
Setup
7.
Select Change Language (F7).
Change
Language
8.
A list of installed languages is displayed. Select Up (F5), orDown(F6) until
the desired language is highlighted.
Software Version 6 User Manual 1.3
MACHINE PROGRAMMING
STAGE 1
9.
Select Load (F1).
Load
The message ‘Loading Language... ’ is displayed. A delay of approximately
20 seconds takes placeand all displayed text is changed tothe selected language.
The message ‘Language Loaded...’ is displayed.
10.
Select Exit (F8).
Exit
11.
Select Exit (F8).
Exit
12.
Select Monitor (F7).
Monitor
13.
Select Log On (F1).
Log
On
The Operator Log On window is displayed:
Using the keyboard, enter the operator’s name/ID and press Enter on the
keyboard, the operator’s name appears on the status page.
1.4 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 1
Operator Log On
Enter Operator ID: