Dek-265GSX-User-Manual.pdf.pdf - 第311页
Parameter Definition Board Outer LR This parameter sets the level of board outer left/right light. Minimum - 0 Maximum - 15 Increments - 1 Default - 8 This parameter is for the silver camera only. Board Outer FR This par…
Parameter Definition
Board Vertical This parameter sets the level of board vertical light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
Screen Oblique This parameter sets the level of screen oblique light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the green camera only.
Board Oblique This parameter sets the level of board oblique light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the green camera only.
Screen Inner LR This parameter sets the level of screen inner left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Inner FR This parameter sets the level of screen inner front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Outer LR This parameter sets the level of screen outer left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Outer FR This parameter sets the level of screen outer front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Inner LR This parameter sets the level of board inner left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Inner FR This parameter sets the level of board inner front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
8.46 User Manual Software Version 6
2Di INSPECTION
MENU PARAMETERS
Parameter Definition
Board Outer LR This parameter sets the level of board outer left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Outer FR This parameter sets the level of board outer front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Limit Set Options This parameter enables the output of these inspections.
Blockage
Smear
Paste
Alignment
Bridging
Volume
Software Version 6 User Manual 8.47
2Di INSPECTION
MENU PARAMETERS
8.48 User Manual Software Version 6
2Di INSPECTION
MENU PARAMETERS