Dek-265GSX-User-Manual.pdf.pdf - 第329页
Fitting a New Paste Cartridge It is necessary at intervals to fit a new paste cartridge into the paste dispenser. If there is no cartridge in the dispenser or the cartridge is empty, the warning window ‘Print Medium Low.…
17.
Select Refill Paste (F1).
Refill
Paste
The message ‘Select Load Cart to load the cartridge or exit to abort.’ is
displayed.
NOTE
Select End Run to terminate the print run without replacing the paste
cartridge.
18.
Select Load Cart. (F1).
Load
Cart.
The message ‘Open thecoverand load thenewpaste cartridgethen close
Cover, press System Button and press Continue’ is displayed.
19. Carry out Steps 3-9 of Fitting a New Paste Cartridge procedure, later in this
section.
20.
Select Continue (F1).
Continue
21.
Select Auto Dispense (F1).
Auto
Dispense
22.
After the dispense routine has been completed, press Exit (F8).
Exit
9.14 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING
Fitting a New
Paste Cartridge
It is necessary at intervals to fit a new paste cartridge into the paste dispenser. If
there is no cartridge in the dispenser or the cartridge is empty, the warning
window ‘Print Medium Low. Please Replenish.’ is displayed.
If the consumable action option in set preferences is set to suspend, the paste
dispenser is checked to ensureavailabilily ofpaste, beforeallowing aprint runto
start. If paste isn’t available the warning window ‘Print Medium Low. Please
Replenish.’ is displayed.
To replace a paste cartridge carry out the following:
1.
Press Paste Load (F3).
Paste
Load
2.
Press Load Cartrdg (F4).
Load
Cartrdg
The print carriage drives tothe front of the machineand the dispenser rises to
the vertical position. A message is displayed on the screen ‘Open Cover
and Replace Cartridge’.
3. Open the printhead cover.
Software Version 6 User Manual 9.15
CONSUMABLE REPLENISHMENTS
PASTE LOADING
WARNING
SOLDERPASTEANDSOLVENTS. WHENUSINGORHANDLINGAN
Y
SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS' RECOMMENDED SAFETY PRECAUTIONS
MUSTBESTRICTLYADHEREDTO.
WARNING
PROTECTIVE CLOTHING. APPROVED PROTECTIVE CLOTHIN
G
SHOULD BE WORN BY SOLDER PASTEAND SOLVENT HANDLERS
AT ALL TIMES TO ELIMINATE FUME INHALATION, EYE
CONTACT,SKINCONTACTANDINGESTION.
4. Remove the empty cartridge by unscrewing the cap at the rear of the paste
dispense tube to allow it to be withdrawn.
5. Unscrew the nozzle from the old cartridge and insert it into the new
cartridge.
6. Fit the new cartridge into the dispenser.
9.16 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING