Dek-265GSX-User-Manual.pdf.pdf - 第210页
PRINT CARRIAGE The Print Carriage diagnostic module contains the following: The menu bar changes to the following: Run Diagnost activates the diagnostic function, as selected by the highlight bar. Next/Previous keys move…
Lid Bolt Shut This option displays the operation of the printhead shot bolt located on the front
of the machine.
Head Prop Stowed This option displays the pit prop stowed status.
Left Jog Button This option displays the operation of the left button of the two button safety
switches located on the front of the machine.
Right Jog Button This option displays the operation of the right button of the two button safety
switches located on the front of the machine.
Software Version 6 User Manual 5.15
DIAGNOSTICS
PRINT HEAD
PRINT CARRIAGE The Print Carriage diagnostic module contains the following:
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Next / Previous keys move the highlight bar up and down the list of diagnostic
parameters.
Incr. / Decr. keys change the value of the selected diagnostic parameter.
Exit returns operation to the print carriage diagnostics page.
NOTE
These parameters are used in diagnostics only and have no affect on the product
board file.
Home Print
Carriage
Selecting this option moves the print carriage back to its home sensor position
and stop. “Homing Print Carriage” is displayed in the prompt box. It is always
advisable to home the print carriage before attempting to position it anywhere.
5.16 User Manual Software Version 6
DIAGNOSTICS
PRINT CARRIAGE
Pr
i
nt Carr
i
age D
i
agnost
i
cs
Cycle Count
Done :-
0, To go :-
50
Home Print Carriage
Drive Carriage To Front Position
Drive Carriage To Paste Position
Drive Carriage To Rear Position
Drive Carriage Using Jog Buttons
Cycle Print Carriage
Print Carriage Diagnostic Parameters
FRONT PRINT SPEED
REAR PRINT SPEED
CYCLE COUNT
25
25
50.0
mm/s
mm/s
Cycles
Drive Carriage to
Front Position
Selecting this option moves the print carriage to the front start position of the
print stroke. “Driving Print Carriage to Front Limit” is displayed in the prompt
box.
Drive Carriage to
Paste Position
Selecting this option moves the print carriage to a position that clears the paste
dispense unit ifoperated. “Driving Print Carriage to Paste Position” is displayed
in the promt box.
Drive Carriage to
Rear Position
Selecting this option moves the print carriage to the end of the print stroke.
“Driving Print Carriage to Rear Limit” is displayed in the prompt box.
Drive Carriage
Using Jog Buttons
Selecting this option allows the user to position the print carriage anywhere
between the front and rear position using either of the two button safety switches
located on the front of the machine. “Use the Left Jog Button to move Print
Carriage towards front and the Right Jog Button to move it towards the rear” is
displayed in the prompt box.
Cycle Print
Carriage
Selecting this option starts a continuous cycle of driving the print carriage
between its front and rear limits pausing at the each end for 2 seconds. “Print
Carriage Cycling” is displayed in the prompt box. The speed is measured and
displayed. The cycle is terminated if the Stop key is used or that the set cycle
count is reached.
Cycle Count This option displays the count when the module is being cycled.
Software Version 6 User Manual 5.17
DIAGNOSTICS
PRINT CARRIAGE