Dek-265GSX-User-Manual.pdf.pdf - 第383页

17. Select Exit (F8). Exit 18. Select Proceed (F1). Proceed The ProFlow unit is placed in contact with the screen. 19. Go to Step 23. 20. If the ProFlow unit is in front of the image continue with Step 21. If the ProFlow…

100%1 / 388
11.
Select Exit (F8).
Exit
12.
Select Yes (F1).
Yes
The message ‘The ProFlow unit will be placed in the REAR envelope’ is
displayed.
13. Ifthe ProFlow unit is required to be placed in another envelope continue with
Step 14. If the ProFlow unit is required tobe placed inthe machine preferred
envelope go to Step 18.
NOTE
The ProFlow unit needs to be in the rear envelope to replenish the ProFlow
transfer head.
14.
Select Select Another (F8).
Select
Another
The following window is displayed:
15.
Use the Next or Previous keys (F4 or F5) to highlight Front.
Next Previous
16.
Select Use (F1).
Use
9.68 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PROFLOW
Preferred Envelope
REAR
FRONT
17.
Select Exit (F8).
Exit
18.
Select Proceed (F1).
Proceed
The ProFlow unit is placed in contact with the screen.
19. Go to Step 23.
20. If the ProFlow unit is in front of the image continue with Step 21. If the
ProFlow unit is at the rear of the image go to Step 23.
21.
Select Run (F1).
Run
The machine carries out a print cycle, the ProFlow unit moves to the rear of
the image.
22.
When the ProFlow unit is at the rear of the image, select End Run (F1).
End
Run
23. Open the front printhead cover.
Software Version 6 User Manual 9.69
CONSUMABLE REPLENISHMENTS
PROFLOW
Recharging 24. Ensure that the ProFlow pressure mechanism is in the raised position (to
expose transfer head diaphragm).
25. Remove the centre filling port bayonet cap.
26. Using either a general purpose mastic gun or the optional pneumatic paste
gun (with a standard paste cartridge loaded). Push the nozzle of the gun into
the centre filling port of the ProFlow transfer head (see figure below).
27. Fill the diaphragm until it starts to balloon, this can be spread sideways by
massaging the diaphragm with the fingers.
28. Alternatively, fill using all three filling ports for even distribution.
NOTE
Ensure that only one port is opened at a time.
9.70 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PROFLOW
Filling Port
Bayonet Cap
Diaphragm
Diaphragm Retainer
Recharging Nozzles
Filling Port
Bayonet Cap
Filling Port
Bayonet Cap
Short Recharging Nozzle