Dek-265GSX-User-Manual.pdf.pdf - 第85页

48. Select Home Position (F7). Home Position 49. Select Raise Head (F2). Raise Head 50. Raise the printhead using two button control. Fit the head prop. 51. Select Board Clamps (F3), to open the clamps. Board Clamps 52. …

100%1 / 388
42.
Select Raise Head (F2).
Raise
Head
43. Raise the printhead using two button control. Fit the head prop.
44. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
45.
Select Head (F2).
Head
46. Remove the head prop. Lower the printhead using two button control.
47.
Press the System button.
1.68 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6F
48.
Select Home Position (F7).
Home
Position
49.
Select Raise Head (F2).
Raise
Head
50. Raise the printhead using two button control. Fit the head prop.
51.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
52. Remove the board from the rails.
53.
Select Head (F2).
Head
Software Version 6 User Manual 1.69
MACHINE PROGRAMMING
STAGE 6F
54. Remove the head prop. Lower the printhead using two button control.
55.
Press the System button.
56.
Select Exit (F8).
Exit
57. Go to Stage 7.
1.70 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6F