Dek-265GSX-User-Manual.pdf.pdf - 第20页
9. Select Load (F1). Load The message ‘Loading Language... ’ is displayed. A delay of approximately 20 seconds takes place and all displayed text is changed to the selected language. The message ‘ Language Loaded...’ is …
3.
Use the Left, Right, Up or Down function keys (F4 - F7) to highlight the
required file.
Left Right Up Down
4.
Press Load (F1).
Load
5.
Initialize the machine by pressing the System button.
The selected file is now displayed on the status page.
The operator can change the language used in the display menus.
To select a different language continue with Step 6. If the correct language is
loaded go to Step 12.
6.
From the status page displayed, select Setup (F6).
Setup
7.
Select Change Language (F7).
Change
Language
8.
A list of installed languages is displayed. Select Up (F5), orDown(F6) until
the desired language is highlighted.
Software Version 6 User Manual 1.3
MACHINE PROGRAMMING
STAGE 1
9.
Select Load (F1).
Load
The message ‘Loading Language... ’ is displayed. A delay of approximately
20 seconds takes placeand all displayed text is changed tothe selected language.
The message ‘Language Loaded...’ is displayed.
10.
Select Exit (F8).
Exit
11.
Select Exit (F8).
Exit
12.
Select Monitor (F7).
Monitor
13.
Select Log On (F1).
Log
On
The Operator Log On window is displayed:
Using the keyboard, enter the operator’s name/ID and press Enter on the
keyboard, the operator’s name appears on the status page.
1.4 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 1
Operator Log On
Enter Operator ID:
14.
Select Exit (F8).
Exit
If this is the correct file for the product proceed to Stage 4. If the file has to be
edited proceed to Stage 3.
Software Version 6 User Manual 1.5
MACHINE PROGRAMMING
STAGE 1