00198599-02_AI_Vacuumpump_X-Series-S-from-Hxxxx_DE_EN.pdf - 第120页

1 Introduction 1.5 Abbreviations 120 Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021

1 Introduction

1.5 Abbreviations

Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021 119

1.5 Abbreviations

Abbreviations Description

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

C&P Collect&Place

C&P12, CP12 Collect&Place head with 12 segments

C&P20, CP20 Collect&Place head with 20 segments

C&P20x Collective term for all C&P20, C&P20 A, C&P20 M, C&P20 P and C&P20 P2

CPP Collect&Pick&Place head

CPx Collective term for all CPP, CP20, CP12 and/or CP6

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

P&P Pick&Place

NC Nozzle changer

SC Station computer

TH TwinHead

1 Introduction

1.5 Abbreviations

120 Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021

2 Brief description



Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021 121

2 Brief description

Every Collect&Place head has a separate vacuum generator that supplies the holding and place-

ment circuit with the vacuum that it needs.

The vacuum generator for the placement heads works according to the Venturi principle. In com-

bination with a vacuum pump, the compressed air consumption can be significantly reduced for the

SIPLACE SpeedStar (C&P20x). The ongoing operating costs are reduced according to the energy

costs.

NOTICE

Maximum of two SIPLACE C&P20x

This vacuum pump can supply a maximum of two SIPLACE C&P20x. If using a SIPLACE

X4S / X4iS with four SIPLACE C&P20x, you therefore need two vacuum pumps. These

vacuum pumps are fitted at locations 1 and 4, behind the COT inserts in the machine base.

NOTICE

Conversion

If you need to convert a gantry from SIPLACE C&P20x to SIPLACE Twin or SIPLACE CPP,

you must re-establish the original compressed air supply for this gantry. That means, you

must perform a conversion reversal on all assemblies for this gantry.

NOTICE

Partial conversion

Partial conversion of the pneumatic unit, for example, involving disconnection of the gantry

hoses (additional vacuum hoses) during compressed air operations, can lead to serious

placement machine malfunctions.

NOTICE

Retrofitting

If you need to convert a gantry from SIPLACE Twin or SIPLACE CPP to SIPLACE C&P20x

with vacuum function, you must retrofit the vacuum equipment for this gantry.

NOTICE

Compressed air operation

If you operate a C&P20x which has been converted for vacuum operation at a gantry with

compressed air, this could lead to serious damage to the placement head if the silicon

hoses to the segments should loosen.

NOTICE

Folded hoses

Make sure that the hoses are never folded or pinched, not even during unpacking, as this

makes them unsuitable for further use.

NOTICE

SIPLACE C&P20P/P2 usually with vacuum

If the SIPLACE C&P20P/P2 is to be used on a machine in compressed air mode (Venturi),

the head must be converted with the "Conversion kit compressed air operation SIPLACE

C&P20P" [03106765-xx].

For a conversion reversal from compressed air mode back to vacuum pump mode, you

need the "Aperture ring assembly C&P20P [03116883-xx].