00198599-02_AI_Vacuumpump_X-Series-S-from-Hxxxx_DE_EN.pdf - 第144页

3 Installation 3.5 Installing the vacuum pump 144 Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021 Fig.26: Support sheet for the vacuum pump ► Push the vacuum pump i…

3 Installation

3.5 Installing the vacuum pump

Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021 143

3.5 Installing the vacuum pump

CAUTION

Safety instructions and manufacturer's instructions

In addition to the safety instructions in the introductory chapter, the manufacturer's safety

instructions, installation and setup instructions apply to the vacuum pump and must be ob-

served.

Avoid switching the placement machine and vacuum pump on and off multiple times within

a short period. This can have a negative influence on the service life of the pump.

The placement machine monitors when the vacuum pump is switched on and off e.g. after

longer production standstill times.

3.5.1 Preparing the vacuum pump

Select the relevant chapter for your version of the vacuum pump:

●

3.5.1.1 "Preparing the vacuum pump (old)" [}143]

●

3.5.1.2 "Preparing the vacuum pump (new)" [}146]

3.5.1.1 Preparing the vacuum pump (old)

Fig.25: Filter, distributor and double nipple

1. Filters

2. Distributor

3. Double nipple

NOTICE

Distributor

First push the vacuum pump into the machine and then screw the distributor to the vacuum

pump.

3 Installation

3.5 Installing the vacuum pump

144 Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021

Fig.26: Support sheet for the vacuum pump

► Push the vacuum pump into the sup-

port sheet(2)

.

► Screw the vacuum pump to the support

sheet with the four screws(1)

.

Fig.27: Fixed vacuum pump

Vacuum pump fixed to the support sheet

with screws.

Fig.28: Double nipple with Teflon tape

► Seal the double nipple (1) with Teflon

tape Loctite 55(2)

.

3 Installation

3.5 Installing the vacuum pump

Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021 145

Fig.29: Vacuum pump without double nipple

► Insert the double nipple into the

vacuum pump (1)

.

Fig.30: Screwing the double nipple into place

► Screw the double nipple(1) to the

vacuum pump(2)

using the ratchet(3).

Fig.31: Screwing the filter into place

► Screw the filter(1) to the double

nipple(2)

. Make sure that the connec-

tion of the filter points towards the top

left in a slanted direction.