00198599-02_AI_Vacuumpump_X-Series-S-from-Hxxxx_DE_EN.pdf - 第207页
在线预览 00198599-02_AI_Vacuumpump_X-Series-S-from-Hxxxx_DE_EN.pdf PDF 文档。
7 Appendix
7.4 Excerpts from the service manual
206 Assembly Instructions / Montageanleitung SIPLACE X-Series S (from/ab Hxxxx) Option Vacuum Pump 02/2021
7.4.7.2 Replacing the silencer (venturi mode only)
Parts
Fig.128: Silencer
03043707-xx Silencer
Equipment and tools
T --- Tools for removing/fitting and calibrating the placement head, if needed
(see also the service manual for your machine)
Preparation
► Remove the head from the machine. For details about removing and fitting the placement
head, refer to the service manual for your machine.
Fit the head on the head mount [03056231‑xx].
CAUTION
Camera
► Make sure that you do not damage or contaminate the camera lens system.
► Make sure that the component sensor protective cap is fitted.
Removal
Fig.129: Silencer
► Remove the screw (2) fastening the si-
lencer (1)
.
► Carefully lever out the silencer.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
– Carefully press the new silencer down, onto the holding circuit.
– Carefully hand-tighten the screw fastening the silencer.
Item no.:
Artikel-Nr.:
00198599-02 ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Straße 44
81379 Munich
Germany
www.asm-smt.com