00197471-03_Service Manual Internal WPC5_6, EN_01-2019.pdf - 第124页
Service Manual In ternal WPC5 / WPC6 Page 4-124 ➢ Fol low the instruction s hown an d continue with Next . ➢ Place the „ Jig for W PC4-6 base p late “ [03073064- 01] (or a WPTC) ( 1) on the sliding rail of the load axi…
Service Manual Internal WPC5 / WPC6
Page 4-123
4.1.5 Teaching the Load Axis Offset Point
You only need to teach the offset point if you have changed the zero point position (see "4.1.2
Teaching the Zero Point Position" [
➙
4-118]).
➢ Remove all waffle-pack tray carriers (WPTC) from the WPC.
➢ Select the lifting axis (1).
➢ Select the function
Teach offset load axis
(2).
➢ Select
Next
(3).
➢ Follow the instruction shown and continue with
Next
.
Service Manual Internal WPC5 / WPC6
Page 4-124
➢ Follow the instruction shown and continue with
Next
.
➢ Place the „Jig for WPC4-6 base plate“ [03073064-01] (or a WPTC) (1) on the sliding rail of
the load axis.
➢ Push the gauge into the tower (2).
➢ Make sure that the gauge can be moved along the sliding rail smoothly.
Service Manual Internal WPC5 / WPC6
Page 4-125
➢ Follow the instruction shown and confirm the changes made with
Finish
.