00197783-01_AI_Gantry-Retrofit_X-Series_S_INTERNAL_de_en.pdf - 第152页
Appendix Description of Boards 4.2.1 Gantry interface 152 Gantry Retrofit Portalna chrüstung 4.2 4 . 2 D e s c r ip t io n o f B o a r d s Description of Boards 4.2.1 4 . 2 . 1 G a n t r y in t e r f a c e Gantry interfa…
Appendix
4.1.7 Overview of Distributor Excerpts from the Service Manual
Gantry Retrofit Portalnachrüstung 151
Appendix
Description of Boards 4.2.1 Gantry interface
152 Gantry Retrofit Portalnachrüstung
4.2
4.2 Description of Boards
Description of Boards
4.2.1
4.2.1 Gantry interface
Gantry interface
Gantry interface [03089220-03]:
This gantry interface is used for gantries 1 and 3.
X3) Y axis motor power
X4) Y axis motor temperature sensor
X6) Y axis incremental encoder
Gantry interface [03089221-03]:
This gantry interface is used for gantries 2 and 4.
X3) Y axis motor power
X4) Y axis motor temperature sensor
X6) Y axis incremental encoder
Appendix
4.2.2 Vision board spread spectrum HCU [03067289-xx] Description of Boards
Gantry Retrofit Portalnachrüstung 153
4.2.2
4.2.2 Vision board spread spectrum HCU [03067289-xx]
Vision board spread spectrum HCU [03067289-xx]
03067289-02
LED [03067289-02]
Dip switch S1 [03067289-02]
LED Color Status Signal name Description
D9 GN ON LED_XC_OK RUN
D10 RD ON LED_XC_ERR ERROR
D12 RD ON XC_RESET RESET
D13 GN ON IO/LVDS51P PCB camera active
D14 GN ON IO/LVDS51N CO camera active
D16 GN ON P12VCAM_I +12VDC for camera
D18 GN ON P5VCAM +5VDC for camera
D19 GN ON P2.5VCAM + 2.5 VDC for camera
D20 GN ON P3.3VCAM + 3.3VDC for camera
D23 GN ON P5V +5VDC
D25 GN ON P15V +15VDC
Switch Status Signal name Description
S1.1 OFF HW_RESET ON: RESET CAN controller
S1.2 OFF CAN_ID Not used