00197783-01_AI_Gantry-Retrofit_X-Series_S_INTERNAL_de_en.pdf - 第156页

Appendix Description of Boards 4.2.3 Head Interface C700X-L/R H R 156 Gantry Retrofit Portalna chrüstung Rotated gantry (gantry 2 a nd 4 at X4i S ) [0 3091023-01]

Appendix

4.2.3 Head Interface C700X-L/R HR Description of Boards

Gantry Retrofit Portalnachrüstung 155

4.2.3

4.2.3 Head Interface C700X-L/R HR

Head Interface C700X-L/R HR

There are two head interface designs. Depending on the gantry, either the head interface C700X-L or

C700X-R will be used.

Standard gantry (not rotated) [03091013-01]

NOTICE

C&P20 P

If you are converting to an C&P20 P, the head interface must have at least function state -03.

Appendix

Description of Boards 4.2.3 Head Interface C700X-L/R HR

156 Gantry Retrofit Portalnachrüstung

Rotated gantry (gantry 2 and 4 at X4i S) [03091023-01]

Appendix

4.2.3 Head Interface C700X-L/R HR Description of Boards

Gantry Retrofit Portalnachrüstung 157

LEDs (Hx) [03091013-01] [03091023-01]

7-segment display V2 [03091013-01] [03091023-01]

7-segment display V12 [03091013-01] [03091023-01]

DIP switch S1 [03091013-01] [03091023-01]

LED Color Status Signal name Description

H1 RD - HCU1_LED_ERROR Not used

H2 RD ON POWERFAIL_BASE PowerFail from power supply

H3 RD ON EMERGENCY-STOP_3V Emergency stop: cover opened

H4 RD ON POWERFAIL_LOCAL_3V PowerFail local: errors at 1.5V,

3.3V, 5V, +15V, -15V

H7 RD ON X_TEMP_SENS X motor: temperature too high

H8 RD - HCU2_LED_ERROR Not used

H9 RD - HCU1_LED_READY Not used

H10 RD - HCU2_LED_READY Not used

H11 GN ON LED_5V_OK FPGA OK

Display Status Description

Decimal point Flashes HCU2 OK

Display Status Description

Decimal point Flashes HCU1 OK

Switch Status Signal name Description

Gantry 1 Gantry 2 Gantry 3 Gantry 4

S1.1 OFF/ON Gantry_ID0 OFF OFF ON ON

S1.2 OFF/ON Gantry_ID1 OFF ON OFF ON

S1.3 OFF COM_BOOT_HCU ON: set HCU to bootstrap mode

S1.4 OFF RESET_HCU2 ON: Reset HCU2

S1.5 OFF RESET_HCU1 ON: Reset HCU1

S1.6 OFF FAN Not used

S1.7 OFF DCDC_OFF ON: Reset, when not all the voltages are present

S1.8 OFF HCU_1_2 Not used