编带机说明书-含图纸tm401.pdf - 第113页
D292104.16.fm Configure Inspection Chapter 5: Setup 5- 11 2. Click T rigger ON , then center a part under the came ra. 3. Select or create a program from the Program drop-down menu. A yellow Selection Box will appear ove…
5-10 TM-403 User’s Guide
Configure Inspection D292104.16.fm
Configure Inspection
Note: Significant portions of this documentation were provided by: Keyence Cor-
poration of America. In order to use the Keyence IV Vision System, the camera
must be configured and set to Run Mode in the Keyence HMI as well as being
enabled on the TM-401 HMI. Please complete the following instructions to cor-
rectly configure the vision system.
Configure Computer
1. Once the connection is complete, the Run/Program window will open. Select
Program.
Downloaded from www.Manualslib.com manuals search engine
D292104.16.fm Configure Inspection
Chapter 5: Setup 5- 11
2. Click Trigger ON, then center a part under the camera.
3. Select or create a program from the Program drop-down menu. A yellow Selection
Box will appear over the part image.
4. Click NAVI Sensor Setup.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER
Downloaded from www.Manualslib.com manuals search engine
