编带机说明书-含图纸tm401.pdf - 第49页
D292104.6.fm Job Tab Chapter 3: Human Machine Interface 3-7 Jo b W i z a rd Pressing the Job Wiza rd button in the Job T ab opens the Job W izard . The Job Wizard has 15 screens that lead the user through the job set-up …
3-6 TM-401 User’s Guide
Job Tab D292104.6.fm
Job Tab Overview
The Job Tab allows the user to select a pre-programmed job, change job information and move
to the other tab screens. It also features an easy-to-use Job Wizard which leads the user through
the job set-up process. The Job Tab is pictured below.
A. Tab Menu
B. Job Library
C. Job Information
D. Control Buttons
A. Press any tab in the Tab Menu to open that tab window.
B. The Job Library holds up to fifty saved jobs (Job 1 through Job 50). The Up and
Down Arrows buttons to the right of the Job Library are used to move through the
job list one job at a time. The Page Up and Page Down Arrows buttons to the left
of the Job Library are used to move through the job list five jobs at a time. The
Enter button selects and highlights a job from the Job Library list so it can be
opened or saved.
C. The Job Information section has two open fields for entering job information: Job
Quantity and Job Description. Press the field to open a keypad for data entry. The
maximum number of characters for any field is 20.
D. At the bottom of the Job Tab there are three control buttons:
• The Open button opens the currently selected job.
• The Save button is used to save current job settings for future use.
• The Job Wizard button opens the Job Wizard, allowing the user to configure job
settings.
A
B
C
D
Downloaded from www.Manualslib.com manuals search engine
D292104.6.fm Job Tab
Chapter 3: Human Machine Interface 3-7
Job Wizard
Pressing the Job Wizard button in the Job Tab opens the Job Wizard.
The Job Wizard has 15 screens that lead the user through the job set-up process. Instructions at
the top of each Job Wizard screen explain each step. The Arrow buttons on the bottom of the
window move the user forward and backwards through the process. Pressing the right Arrow
button opens the next Job Wizard screen. Pressing the left Arrow opens the previous screen.
In the first Job Wizard screen the user resets the job to initialize the system. Press Reset Job,
then press the right Arrow key to move to the next Job Wizard screen.
Arrow Buttons
Job Wizard Step 1
Downloaded from www.Manualslib.com manuals search engine
3-8 TM-401 User’s Guide
Job Tab D292104.6.fm
In the second Job Wizard screen the user enters the Quantity of parts that will be run and
a brief Description of the job. When the job parameters are set, press the right Arrow
key to move to the next Job Wizard screen.
The third Job Wizard step sets up Taper operation.
A. Tape Pitch is determined by the carrier tape
selected. Use the Pitch Setting Guide on the taper to
determine the correct pitch. Press the Tape Pitch
field to open a keypad and type in the desired value.
Arrow Buttons
Job Wizard Step 2
A
B
Job Wizard Step 3
C
C
Downloaded from www.Manualslib.com manuals search engine