编带机说明书-含图纸tm401.pdf - 第15页
Safety Warning Labels D292104.2.fm xi Safety W arning Labels The following warning labels have bee n placed in various places o n the machine to bring safety issues to the attention of operators and te chnicians working …
Safety Features D292104.2.fm x
To w e r L i g h t
The tower light feature allows taping machine operators and production
supervisors in determining the operational state of the taping machine at a
glance.
Color Codes
Green
A solid green light indicates the machine is running a job.
Red
A flashing red light indicates that the machine is on but not running.
Green + Amber
The combination of a solid green light and a solid amber light indicate the
machine is at the end of a job and is in the process of creating a leader.
Red + Amber
The combination of a blinking red light and a blinking amber light indicates
the machine is at the end of a job and attempting to create a leader, how-
ever something has interfered with the process, stopping the machine.
A blinking red light and a solid amber light indicates the machine is at the end of a job, the leader
creation sequence is complete and the TM-401 is ready for the next process.
Downloaded from www.Manualslib.com manuals search engine
Safety Warning Labels D292104.2.fm xi
Safety Warning Labels
The following warning labels have been placed in various places on the machine to bring safety
issues to the attention of operators and technicians working with or near the machine.
Attention
Indicates an adjustment or danger zone requiring attention.
Electrical Hazards
Indicates that hazardous voltage levels are present. Always disconnect power to
the machine before removing panels or enclosures with this warning label.
Te m p e r a t u r e H a z a r d s
Indicates a hot surface. Use care when working near these surfaces and allow
them to cool before performing maintenance.
Pinch Hazard
Indicates areas where moving parts or doors can pinch fingers if safety precau-
tions are not observed.
Consult Manual
Consult User’s Guide for proper procedure.
Disconnect power and air supplies and refer to Chapter 8: Maintenance of this
manual before performing maintenance on the TM-401.
Note: Do not remove or obstruct any of the warning or instruction labels on the
TM-401.
Downloaded from www.Manualslib.com manuals search engine
Contact Information D292104.2.fm xii
Contact Information
V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
TEL: (507) 389-2039
FAX: (507) 387-2257
email:service@vtekusa.com
website: http://www.vtekusa.com
For customer service, please refer to the Customer Service Contact Sheet at the back of this
manual.
European Representative:
QNET BV
Hommerterweg 286
6436 AM Amstenrade
The Netherlands
KvK Zuid-Limburg 14091511
email: qnet@ce-authorizedrepresentative.eu.
website: www.ce-authorizedrepresentative.eu
Downloaded from www.Manualslib.com manuals search engine