编带机说明书-含图纸tm401.pdf - 第54页
3-12 TM-401 User’s Guide Job Tab D292104.6.fm The next si x Job Wizard screens are used to set the Nozzle positions at the Pick and Place locations. The first is shown below . A. Press Pick Extend/Pick Retract to lowe r …
D292104.6.fm Job Tab
Chapter 3: Human Machine Interface 3-11
A. Center the Pick Head over the first track pocket using the HMI Jog but-
tons or the Jog buttons on top of the Sealer enclosure. To see an illus-
tration of the correct head placement, push the Help icon.
An illustration of the Tube Feeder with the first track
pocket identified will appear.
B. The distance the head moves with each Jog is set in
the Head Jog Step field.
C. Press Learn. The Learned Position will now match the
Current Position and the Learn button will turn green
and update to read Learned. (see Step 7 below.)
Press the right Arrow to move to the next Job Wizard screen.
A. Center the Pick Head over the last track pocket using the Jog buttons.
To see an illustration of the correct head placement, push the Help
icon.
B. The distance the head moves with each Jog is set in the Head Jog Step field.
C. Press Learn. The right Arrow Key will appear. Press the right Arrow to move to
the next Job Wizard screen.
Note: It is useful to note the current position for both Pick Position 1 and Pick Position 2
for future use or to help when making fine adjustments.
A
C
Job Wizard Step 7
B
Downloaded from www.Manualslib.com manuals search engine
3-12 TM-401 User’s Guide
Job Tab D292104.6.fm
The next six Job Wizard screens are used to set the Nozzle positions at the Pick and
Place locations. The first is shown below.
A. Press Pick Extend/Pick Retract to lower the Nozzle to the tube pocket. Follow
the directions in Chapter 4: Setup for manually adjusting the Pick Actuator to set
the correct Nozzle Height.
Press the right Arrow Key to move to the next Job Wizard screen.
A. Press Pick Part to activate the nozzle and pick a part.
Job Wizard Step 8
A
A
B
Job Wizard Step 9
Downloaded from www.Manualslib.com manuals search engine
D292104.6.fm Job Tab
Chapter 3: Human Machine Interface 3-13
B. If no rotation is required for part placement, skip this step. If part rotation is
required for placement, press Rotate Part to rotate the Nozzle 90°. Follow the
directions in Chapter 4: Setup for manually adjusting the Solenoid to set Pick
Head Rotation.
Press the right Arrow Key to move to the next Job Wizard screen.
A. The Arrow keys allow the user to jog the Pick Head and Carrier Tape forward or
backward in small preset increments. This is useful for centering the Nozzle in the
pick and place positions.
• The Up/Down Arrow keys move the Pick Head forward and backward.
• The Left/Right Arrow keys move the tape left and right in the Taper Track.
B. Enter the value in millimeters for the Head Jog Step and Taper Jog Step fields.
C. Pressing Set Place Position saves the current Nozzle position as the Place posi-
tion for the current job. The Learned Position will update to match the Current
Position on the screen.
A
C
Job Wizard Step 10
B
Downloaded from www.Manualslib.com manuals search engine