4OM-1625-004_w.pdf - 第124页

4OM-1603 2-5 2. Management Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 010904 Feederbaseconrm…

4OM-1603

2-4

2. Management Information : Chap.2

2.2 Management Information List

Management

Information Code

Display Area A (The outline of the Management Information)

Display Area B (The details of the Management Information)

010101

Emergency Stop

Press [POWER ON] button to activate Load Power circuit.

010103

Emergency Stop

Emergency Stop switch is pressed. Please cancel it.

010201

Air Pressure Drop

Detection of Air Pressure Drop is detected

010401

Safetycoverlockconrm

Please close and lock the safety cover.

010402

Safetycoverlockconrm

Operate after close and lock the safety cover. (LED on)

010403

Safetycoverlockconrm

Operate after close and lock the safety cover.

010404

Safetycoverlockconrm

The safety cover is in unlock. Please complete to unlock and operate it.

010503

Beam XY main loop OFF

Beam XY main circuit Error

010801

Feederbaseconrm(Rear)

Set the feeder cart (rear) and connect cable.

010802

Feederbaseconrm(Rear)

Detect elevator unit (rear).

Operate after remove elevator .

010803

Feederbaseconrm(Rear)

Could not detect elevator unit (rear).

Connect elevator unit and operate by "unit exchange menu".

010804

Feederbaseconrm(Rear)

Disconnect elevator unit (rear).

Check connector.

010805

Feederbaseconrm(Rear)

Feeder cart (rear) is not upper position.

Push feeder ready sw.

010806

Feederbaseconrm(Rear)

Push feeder ready sw.

010807

Feederbaseconrm(Rear)

Feeder base power or Feeder power is "OFF". Please press "Feeder Ready"

switch(Rear), and put it up again after putting Feeder Cart(Rear) down.

010901

Feederbaseconrm(Front)

Set the feeder cart (front) and connect cable.

010902

Feederbaseconrm(Front)

Detect elevator unit (front).

Operate after remove elevator .

010903

Feederbaseconrm(Front)

Could not detect elevator unit (front).

Connect elevator unit and operate by "unit exchange menu".

1012-005

4OM-1603

2-5

2. Management Information : Chap.2

Management

Information Code

Display Area A (The outline of the Management Information)

Display Area B (The details of the Management Information)

010904

Feederbaseconrm(Front)

Disconnect elevator unit (front).

Check connector.

010905

Feederbaseconrm(Front)

Feeder cart (front) is not upper position.

Push feeder ready sw.

010906

Feederbaseconrm(Front)

Push feeder ready sw.

010907

Feederbaseconrm(Front)

Feeder base power or Feeder power is "OFF". Please press "Feeder Ready"

switch(Front), and put it up again after putting Feeder Cart(Front) down.

011001

Empty Feeder (rear)

Please set the feeder (rear) that used by the pattern program.

011101

Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

010b01

Feeder is not ready (rear)

Please turn on the Feeder Ready SW (rear).

010c01

Feeder is not ready (front)

Please turn on the Feeder Ready SW (front).

010d01

Pattern program is abnormal

Please set the normal pattern program

010e01

Prod Chng is not ready

Conveyorwidthdoesnottproductiondata.

Execute conveyor width setup.

011401

Zeroingnotnish

Perform All zeroing

011402

Zeroingnotnish

Perform All zeroing

011403

Zeroingnotnish

Perform All zeroing

011404

Zeroingnotnish

Perform All zeroing

011405

Zeroingnotnish

Perform All zeroing

011406

Motor is not servo on

Perform All zeroing

011701

P.C.B. position

Please position the P.C.B.

011702

P.C.B. position

Set the P.C.B. lower side position.

011703

P.C.B. position

Set the P.C.B. upper side position.

011704

P.C.B. position

Execute P.C.B. position cancel after cancelling operation.

011705

P.C.B. position

Please position P.C.B. [Input or Output] of [Lane A]

1012-005

4OM-1603

2-6

2. Management Information : Chap.2

Management

Information Code

Display Area A (The outline of the Management Information)

Display Area B (The details of the Management Information)

011706

P.C.B. position

Please position P.C.B. [Output position] of [Lane A].

011707

P.C.B. position

Please position P.C.B. [Input position] of [Lane A].

011708

P.C.B. position

Please position P.C.B. [Input or Output] of [Lane B].

011709

P.C.B. position

Please position P.C.B. [Output position] of [Lane B].

01170a

P.C.B. position

Please position P.C.B. [Input position] of [Lane B].

011a01

Nozzlestockerlowerlimitconrmation

Please perform All zeroing.

011c01

Nozzlearrangementconrmation

The nozzle arrangement of the Current Program and the head is different.

012a01

Tray shortage Comp (rear)

Please supply comp, close tray door(rear) and push tray ready SW(Rear).

012b01

Tray shortage Comp (front)

Please supply comp, close tray safety door and push tray ready SW(Front).

013101

Feeder set Err

A pickup miss comp is detected. (Rear)

013102

Feeder set Err

The feeder latch worked off. (Rear)

013103 Feeder set Err

A pickup miss comp is detected. (Front)

013104 Feeder set Err

The feeder latch worked off. (Front)

013105 Feeder set Err

Not connect selected feeder.

013b01 Feeder Ready SW

Please wait stage ready on

013c01 Stage Ready SW

Please wait feeder ready on

013c02 Stage Ready SW

Do not open safety cover while line sensor program updating.

014101 Operation Parameter

Test mode of transfer set ""Disable"" in pass mode.

Check setting.

014102 Operation Parameter

-----

014103 Operation Parameter

-----

014201 Device System Setup

Please set Input Machine Output Mode [SMEMA Mode].

014202 Device System Setup

Please set Output Machine Output Mode [SMEMA Mode].

1012-005