4OM-1625-004_w.pdf - 第22页

Safety Precautions Safe-1 1 1OM-1603 Alert Indications described as " CAUTION " Alert Description Related Items Avoidhandandngerinjuries. • Be careful to avoid hand and nger injuries when closing the tran…

100%1 / 347
Safety Precautions
Safe-10
1OM-1603
Alert Indications described as "
WARNING
" (continued)
Alert Description Related Items
Pay close attention to the cutter blade during the maintenance
work.
•
Lack of attention will result in a hand injury
, etc.
Wear gloves and take the greatest care in performing the work.
•
Be sure to attach the cutter blade cover to the cut unit during
the maintenance work for safety purposes.
"3.2.6" in "Chapter
1 (Vol. 4)"
1003-003
3. Alert Indications in Instruction Manual
Safety Precautions
Safe-11
1OM-1603
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoidhandandngerinjuries.
•
Be careful to avoid hand and nger injuries when closing the
transparent covers.
•
Hold the handgrip rmly and open or close the cover (door type)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or ickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.6" in
"Chapter 1 (Vol. 1)"
Before
performinganywork,conrm
thatthe"LOCK"lampon
the operation panel is "ON" (green).
•
Ifthe"LOCK"lampis
notturnedon,themachinecanbe
operated at any time from the front and rear sides, endangering
the operators around the machine.
•
Before performing any setup work with the machine being
powered up, turn on the [PNL CHANGE] button and the
"LOCK"lamponthefront
ortherearoperationpanel.
"2.3.4" in
"Chapter 1 (Vol. 1)"
Before operating the machine, conrm that there are no people around
the machine (especially, the other side of the machine operation) and no
objects such as tools and parts are left around the machine.
"3.2" in
"Chapter 1 (Vol. 1)"
"1.1.4" and
"4.1" in
"Chapter 3 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Depending on the setting of the PCB discharge from the input machine
to the output machine, the conveyor might be moved in direction Y
because the "PCB Direction Y Arrangement Operation" is performed at
the moment when the PCB is removed. In such case, your nger might
be caught.
"3.2" in
"Chapter 1 (Vol. 1)"
1012-005
3. Alert Indications in Instruction Manual
Safety Precautions
Safe-12
1OM-1603
1012-005
3. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine.Such an object can easily be affected by
the magnetism.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"3.4" in
"Chapter 1 (Vol. 1)"
When a tape feeder is attached or detached, be sure not to drop
it.
Otherwise, a foot injury will result or the feeder itself may be damaged.
Carefully handle each feeder one by one and do not drop any.
"3.8" in
"Chapter 1 (Vol. 1)"
"2.2.4" in
"Chapter 3 (Vol. 1)"
"3.1" in
"Chapter 3 (Vol. 1)"
Hazardoustoyourhandsand
ngers!
·
Be sure to hold the handle to move the bank feeder change cart.
·
Be careful not to hit your hand against the cover while installing the
bank feeder change cart onto the main machine.
"3.8.1" in
"Chapter 1 (Vol. 1)"
Hazardous
toyourhandsand
ngers!
·
Be sure to hold the handle to move the bank feeder change cart.
"2.2.4" in
"Chapter 3 (Vol. 1)"