4OM-1625-004_w.pdf - 第139页
4OM-1603 2-20 2. Management Information : Chap.2 1012-005 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 0d0f06 Height T …
4OM-1603
2-19
2. Management Information : Chap.2
1012-005
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
060501 Nozzle Check
Nozzle is placed. Store it, and then execute.
060601 Cart Check
There is a possibility of Rear/Front of Cart missing. Please set cart normally.
060602 Cart Check
Cart (rear) is not upper position. Please put it up.
060603 Cart Check
Cart (Front) is not upper position. Please put it up.
060604 Cart Check
Cannot operate it because Cart(Rear) is not at upper position or its connector is
off. ( It is dangerous to put the hand into a space between the Cart and the Safety
Cover.)
060605 Cart Check
Cannot operate it because Cart(Front) is not at upper position or its connector is
off. ( It is dangerous to put the hand into a space between the Cart and the Safety
Cover.)
060701 Error in Carrier supplying Cmpnt
Itisimpossibletopick-upthis
cmpntfromspeciedFeeder.Pleasechangethe
Placement mode as [By Hand].
060801 Cutter
Please close and lock the safety cover, and then operate it(Rear).
060802 Cutter
Please close and lock the safety cover, and then operate it(Front).
0d0b01 Cart Check
-----
0d0c01 Pickup miss comp, Disengaged Latch Check
Please open the safety door. Are there no dropped pickup miss comp , no
disengaged Latch? Check them. If the comp was dropped, there is a possibility of
interference with Head.
0d0d01 ConrmbendingNoz
Openthesafetydoor
,andthenconrmwhetherNozplacedinheadisbent.
0d0e01 Zeroing of Cutter is not completed
Execute All zeroing
0d0f01 Height Teaching
Cmpnt is picked-up, or there is a nozzle which has turned on the Valve(Head in
the Rear side). Please remove the cmpnt, and turn off the Valve.
0d0f02 Height Teaching
Cmpnt is picked-up, or there is a nozzle which has turned on the Valve(Head in
the Front side). Please remove the cmpnt, and turn off the Valve.
0d0f03 Height Teaching
Tray's Pallet is not pulled out(Rear). Please pull it out.
0d0f04 Height Teaching
Tray's Pallet is not pulled out(Front). Please pull it out.
0d0f05 Height Teaching
Cannot teach Stocker Master height of the third and forth line for Stocker 2 of One
side Machine,
4OM-1603
2-20
2. Management Information : Chap.2
1012-005
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
0d0f06 Height Teaching
There is no place for Glass Jig in the Head, so that could not teach the height of
Glass Jig.
0d1001 Stop Command
Interlock is detected. Please retry to execute after removing the factor.
0d1101 Flux dispensing unit squeegee error detect
Pleaseputdownsqueegeenotto
separatefromuxdispensingunit.
0d1201 Flux dispensing unit motor warning detect
Pleasetakeout/inuxdispensingand
thenrestarttorun.
0d1301 Uninstalled Flux dispensing unit
Pleasesetuxdispensingunitto
useinpatternprogramdata.
T4B1
4OM-1603
2-21
3. Machine Information : Chap.2
3. Machine Information
3.1 Machine Information Window
In this window, various machine information items are displayed during the
machine operation.
Note
The machine is not stopped with this indication.
[1]
[4]
[3]
[2]
[5] [6]
F4B3
[1] Machine Information Code
The machine information code is described in this text box.
[2] Display Area A
The outline of the machine information is displayed in this area.
[3] Display Area B
The details of the machine information are displayed in this area.
[4] Display Area C
The check procedure for the machine information item is displayed in this
area.
[5] [Clear Alm] Button
When this button is pressed, only the alarm buzzer is cancelled.
[6] [OK] Button
When this button is pressed, the "Machine Information" window is closed.
1012-005