4OM-1625-004_w.pdf - 第133页

4OM-1603 2-14 2. Management Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 030432 Operation Requirem…

100%1 / 347
4OM-1603
2-13
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
018b02 Library Tape Width check
Library Tape Width differs from Feeder. Please check Library and Feeder.(Front)
019001 Support Pin
Please move exchange position of support pin.
019002 Support Pin
Noz for enchasing support pin is not set, or Odd-shape noz is set.
019003 Support Pin
Placement data in current differs from it of Support Pin of current pattern program.
Please set-up the support pin.
019004 Support Pin
When PCB size 216mm is exceeded, it is impossible to operate if Support pins of
Lane A remain. Please exchange Lane A, or take out it from machine.
019005 Support Pin
It is impossible to do operation for only Lane B because Support Pins of Lane A
remain. Please exchange Lane A, or take out it from machine.
019006 Support Pin
Operation for Lane A is impossible because Support Pins of Lane A have not been
installed. Please exchange Support pins or store them.
019007 Support Pin
It is impossible to do Operation for only Lane A because Support Pins of Lane B
remain. Please exchange Lane B, or take out it from machine.
019008 Support Pin
Support pins of Lane B remain on the base for Support pins of Lane A, so that it is
impossible to do Conveyor width. Please exchange Support pins or store them.
019009 Support Pin
Arrangement of Support Pins interferes in Conveyor. Please retry to arrange it.
030162 Operation Requirement
The pattern cannot be switched
030413 Operation Requirement
Specify the order No.
030416 Operation Requirement
ACV server does not pass the authorization. Please retry connection to server on
a screen [UNIT ADJ]-[ACV Set].
03041c Operation Requirement
ACV
CheckError.ComponentID
onthefeederisnotsameasonespeciedby
current program.
030420 Operation Requirement
CommunicationswiththeACVserveris
impossible.AfterconrmingtheACV
server, please try to perform it again in the tab sheet: [MAINT]-[UNIT ADJ]-[ACV
ADJ].
030430 Operation Requirement
Can not detect Feeder cart(Rear). Please set Feeder cart to the inside.
[B0910, B0911]
030431 Operation Requirement
Can not detect Feeder cart(Front). Please set Feeder cart to the inside.
[B0910, B0911]
1012-005
4OM-1603
2-14
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
030432 Operation Requirement
The connector of the feeder base (rear) is not connected to the main body, so
please connect it. [B0916]
030433 Operation Requirement
The connector of the feeder base (front) is not connected to the main body, so
please connect it. [B0916]
030440 Operation Requirement
The Safety cover is open. Please close it.
030441 Operation Requirement
It is impossible to do Pass Operation without Cart because func of Traceability is
valid. Please restart after setting Option invalid.
030442 Operation Requirement
It cannot run because a simple Cover locked. First, set Stage ready OFF, then set
Stage ready ON.
030501 Misidenticationatypeofmulti-tray
The
connectedTrayunit(Rear)doesn'tmatchsetupofDevice.Pleaseconrma
type of tray unit, set it on unit exchange screen later.
030502 Misidenticationatypeofmulti-tray
The
connectedTrayunit(Front)doesn'tmatchsetupofDevice.Pleaseconrma
type of tray unit, set it on Unit Exchange Screen later.
030601 ConrmationofthepositionofNoz
Stocker
Cannot use Noz stocker from the second to the forth when full tray is used. Please
set the location of Noz stocker of Device(Rear) on Unit exchange Screen.
030602 ConrmationofthepositionofNoz
Stocker
Cannot use Noz stocker from the second to the forth when full tray is used. Please
set the location of Noz stocker of Device(Front) on Unit exchange Screen.
030603 ConrmationofthepositionofNoz
Stocker
Cannot use Noz stocker from the second to the forth when full tray is used. Please
conrmthelocationofNozstockerofDevice(Rear).
030604 ConrmationofthepositionofNoz
Stocker
Cannot use Noz stocker from the second to the forth when full tray is used. Please
conrmthelocationofNozstockerofDevice(Front).
030701 Conrmationof2DBarcodeData
MarkNo.ofOperatingParameter/2DBarCodedataisspeciedasAllSkip(0).
Please specify proper Mark No.
030801 Detect nozzle coming off multi-functional stocker
Machine(Rear) Detected that nozzle has come off the multi-functional stocker of
the 1st line.
030802 Detect nozzle coming off multi-functional stocker
Machine(Rear) Detected that nozzle has come off the multi-functional stocker of
the 4th line.
030803 Detect nozzle coming off multi-functional stocker
Machine(Front) Detected that nozzle has come off the multi-functional stocker of
the 1st line.
1012-005
4OM-1603
2-15
2. Management Information : Chap.2
1012-005
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
030804 Detect nozzle coming off multi-functional stocker
Machine(Front) Detected that nozzle has come off the multi-functional stocker of
the 4th line.
050201 ConrmationofP.C.B.existence
Remove P.C.B. from Conveyor
050202 Conrmationof
P.C.B.existence
P.C.B. is detected from Input position because Finish mode is set [Output].
Please P.C.B. from conveyor.
050203 Conrmation
ofP.C.B.existence
P.C.B. is detected from Output position because Finish mode is set [Input].
Please P.C.B. from conveyor.
050204 Conrmation
ofP.C.B.existence
P.C.B. was detected from Inlet sensor of input conveyor.
Please remove P.C.B.
050205 Conrmation
ofP.C.B.existence
The operation mode of Lane A is set [STOP].
Please remove P
.C.B. when not transferred.
050206 ConrmationofP.C.B.existence
The operation mode of Lane B is set [STOP].
Please remove P.C.B. when not transferred.
050207 Conrmation
ofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the input conveyor. Please
remove PCB from Deceleration Sensor, or move it to Stop sensor, or delete the
PCB memory information.
050208 Conrmation
ofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the input conveyor in Lane
A. Please remove PCB from Deceleration Sensor, or move it to Stop sensor, or
delete the PCB memory information.
050209 Conrmation
ofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the output conveyor in
Lane B. Please remove PCB from Deceleration Sensor, or move it to Stop sensor,
or delete the PCB memory information.
05020a Conrmation
ofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the shuttle conveyor in
input side. Please remove PCB from Deceleration Sensor, or move it to Stop
sensor, or delete the PCB memory information.
05020b Conrmation
ofP.C.B.existence
There is a possibility that there are 2 sheets of PCB on the shuttle conveyor in
output side. Please remove PCB from Deceleration Sensor, or move it to Stop
sensor, or delete the PCB memory information.
050301 Conrmation
ofFirmwareversion
Firmware of transfer driver is not the latest version.
Please update it with the latest version.
050401 Manual transfer
P.C.B. (X>260mm) which is set by PP data is unable to take Input Position.