4OM-1625-004_w.pdf - 第271页
4OM-1603 3-1 16 3. Error IDs and Remedial Procedures : Chap.3 1012-005 3.1 1 Handling Error Error ID Error Name, Description, Cause, and Remedy 500101 Comp. Missing (Sensor) Comp. Missing (Sensor) There is a possibility …
4OM-1603
3-115
3. Error IDs and Remedial Procedures : Chap.3
1012-005
Error ID Error Name, Description, Cause, and Remedy
4b5301 Disposal error
Error in the disposal
Please retry to dispose. Please remove the cmpnt in the head and restart up if
there is still an error.
T4C12
4OM-1603
3-116
3. Error IDs and Remedial Procedures : Chap.3
1012-005
3.11 Handling Error
Error ID Error Name, Description, Cause, and Remedy
500101 Comp. Missing (Sensor)
Comp. Missing (Sensor)
There is a possibility that the picked comps. have fallen on the feeder and please
conrmit.
500301 Comp. Missing (Recog)
Comp. Missing (Recog)
There is a possibility that the picked comps. have fallen on the feeder and please
conrmit.
500401 Comp. Recog Error
Comp. Recog Error
-----
500501 Shortage of Component
Shortage of Component
-----
500502 Feeder Reload Stop
Feeder Reload Stop (Splicing)
-----
500c01
Comp. Vertical(Sensor)
Comp. Vertical(Sensor)
-----
500f01 Comp.
Thickness(Sensor)
Comp. Thickness(Sensor)
-----
501001
-----
T4C13
4OM-1603
3-117
3. Error IDs and Remedial Procedures : Chap.3
1012-005
3.12 Automatic Operation Error
Error ID Error Name, Description, Cause, and Remedy
510a01 Feeder Pocket recog Error
Abnormality occurred in process of recognizing Feeder Pocket.
-----
510b01 Auto Run Error
Master bad mark detection is abnormal.
-----
510b02 Auto Run Error
Bad mark detection is abnormal.
-----
510e01 Nozzle air blow Error(Rear)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
510e02 Nozzle air blow Error(Rear)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
510e03 Nozzle air blow Error(Rear)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
510f01 Nozzle air blow Error(Front)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
510f02 Nozzle air blow Error(Front)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
510f03 Nozzle air blow Error(Front)
Because abnormality had occurred while processing the nozzle air blow,
processing was interrupted.
-----
511001 Head Preparation Error(Rear)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----
511002 Head Preparation Error(Rear)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----
511003 Head Preparation Error(Rear)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----