4OM-1625-004_w.pdf - 第313页
4OM-1603 3-158 3. Error IDs and Remedial Procedures : Chap.3 1012-005 3.18 System Error Error ID Error Name, Description, Cause, and Remedy FE0101 Auto Control Error In auto control the operation can't be continued …
4OM-1603
3-157
3. Error IDs and Remedial Procedures : Chap.3
1012-005
Error ID Error Name, Description, Cause, and Remedy
740708 ACV server timeout
There was no communication response from the CPU1.
-----
740801 ACV check
The S/N of the machine didn't log in ACV server
-----
740802 ACV check
The S/N of the operator didn't log in ACV server
-----
740a01 ACV check
Starting of ACV tray tag reading went wrong.
-----
740f01 ACV check
Splicing registration failed.
-----
740f02 ACV check
Splicing registration failed for the unused feeder.
-----
740f03 ACV check
Abnormality
wasfoundintheconnection
withtheACVserver.Pleaseconrmthe
ACV server. Please execute the server connection again on "MAINTENANCE"-
"UNITADJ"-"ACVADJ"-screenafteritconrmsit.
-----
T4C19
4OM-1603
3-158
3. Error IDs and Remedial Procedures : Chap.3
1012-005
3.18 System Error
Error ID Error Name, Description, Cause, and Remedy
FE0101 Auto Control Error
In auto control the operation can't be continued Error(Refer to syslog)
-----
FE0201 XY Control Error
Error in XY Control Sequence (cf. Syslog)
-----
FE0202 XY Control Error
Error in interface check of XY Control Sequence (cf. Syslog)
-----
FE0203 XY Control Error
Timeout in XY Control
-----
FE0301 Control System Error
Error in control system. Control system restarts.
There is a possibility that components fall on PCB or in the device when
components are still picked up. Please check it.
FE0302 Control System Error
Control system failed to restart. Please shut down it.
-----
T4C20
4OM-1603
1012-005 4-A
Chapter 4
Troubleshooting from Recognition Error IDs
This chapter describes the troubleshooting from recognition error IDs.
1. Description of Recognition Error ID (Example)
2. Recognition Error IDs and Controlled Areas
3. Recognition Error IDs and Remedial Procedures