4OM-1625-004_w.pdf - 第79页
4OM-1603 1-26 3. Maintenance Spots : Chap.1 1003-003 3.2.6 Feeder Cart Section (Cutter) Remove the screw on the other side. (12 locations) Cutter Box Inside Every W eek Cleaning (1) Detach the bank feeder change cart. (2…

4OM-1603
1-25
3. Maintenance Spots : Chap.1
1003-003
Scrap Box
Every Day Cleaning
Required Time: 1 minute
When the scrap box is filled with the tape with
no components, draw the scrap box out and
remove such tape.
Reel Box
Every Day Cleaning
Required Time: 5 minutes
Clean the dust and debris at the bottom of the
reel box using a vacuum cleaner, or open the
cover and drop any dust and debris into the
scrap box.
F4A18

4OM-1603
1-26
3. Maintenance Spots : Chap.1
1003-003
3.2.6 Feeder Cart Section (Cutter)
Remove the screw on the other side. (12 locations)
Cutter Box Inside
Every Week Cleaning
(1) Detach the bank feeder change cart.
(2)
(3)
Use a vacuum cleaner with a narrow air opening
in the nozzle.
Note
Narrow Air Opening in Nozzle End
(Recommended)
Required Time: 10 minutes
Remove the screws (12 locations) on the cutter unit in
the bank feeder change cart and remove the cover.
Clean any debris or dust inside the cutter unit using the
vacuum cleaner.
F4A20

4OM-1603
1-27
3. Maintenance Spots : Chap.1
1012-003
WARNING
Pay close attention to the cutter blade during the
maintenance work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in
performing the work.
•
Be sure to attach the cutter blade cover to the
cut unit during the maintenance work for safety
purposes.
Linear Guides
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
(1) Remove 6 screws.
(2)
Use Type N nozzle.
Type N
Note
Wipe old grease out using a rag and apply new grease
onto the linear guide (upper and lower sides).
(1) Remove 6 screws.
(2) Insert the nozzle in the hole and supply grease.
(3) Wipe out overflowed grease.
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
Every 3 Months Lubrication
Needle Bearing
Use Type P nozzle.
Type P
Note
F4A21