4OM-1625-004_w.pdf - 第7页
4 1OM-1603 1003-003 Identifying Icons in Manual Notice This icon shows an important precautionary or a regulatory item. Note This icon shows the descriptions for correct operations of the machine. Reference This icon sho…
3
1OM-1603
1012-004
Volume 6 : Component Library
This includes an explanation of component library data and how to create it.
Volume 7 : Multi-Layer Tray Feeder
This section describes the multi-layer tray feeder and operation procedure.
Volume 8 : Recycle Conveyor
This section describes the recycle conveyor and operation procedure.
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(rst part of this manual).
4
1OM-1603
1003-003
Identifying Icons in Manual
Notice
This icon shows an important precautionary or a regulatory item.
Note
This icon shows the descriptions for correct operations of the machine.
Reference
This icon shows the items to be referred to.
Procedure
This icon shows the operation procedures.
Refer to the glossary (Vol. 1) for the denitions of basic words (X/Y Beam Section, Cover
Section, etc.) used in this manual.
5
1OM-1603
0908-002
Caution and Warning
Limited Warranty
Hitachi represents and warrants the following based on the specications in the instruction
manual as long as this machine is used in accordance with the provided instructions.
(1) Coverage
Should the machine fail or malfunction because of a manufacturing defect in
materials or workmanship, we will repair it free of charge.
(2) Warranty Period
The machine is warranted in normal use for a period of one year (not later than
twelve months) from the date of installation.
(3) Warranty Exclusions
This warranty does not apply in the following cases even within the warranty period.
(a) Damage caused by failure to provide the specied suitable installation,
operating environment, or maintenance for the machine.
(b) Damage caused by failure to use the specied power source (voltage and
frequency), including abnormal power supply.
(c) Damage caused by pipe corrosions and deterioration due to impurities mixed
into the air supplied by the customer.
(d) Damage caused by corrosions in electrical circuits and deterioration of optical
elements due to ambient air mixed with strong corrosive gas.
(e) Damage caused by hardware, software, and auxiliar
ies that are not provided by
us.
(f) Damage caused by failure to handle or maintain the machine properly
.
(g)
Damage caused by any repair work performed by any party other than the
servicing company approved by us.
(h) Damage caused by failure to move or transport the machine properly after
installation.
(i) Damage caused by unapproved disassembly, modication, or machine transfer
to another place.
(j)
Damage ca
used by a Force Majeure such as, but not limited to, re, earthquake,
storm, ood, lightning, strike, labor dispute, riots, crimes, terrorism, war,
radioactive contamination, toxic substance, or any other incident beyond our
reasonable control.
(k) Damage caused by a computer virus.