4OM-1625-004_w.pdf - 第274页

4OM-1603 3-1 19 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 51 1209 T ransfer Section's Preparation Error Downward movement on PCB Stopper(AL) is abnormal. -----…

100%1 / 347
4OM-1603
3-118
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
511004 Head Preparation Error(Rear)
There is a possibility that Nozzle is falling while processing the preparation.
PleaseconrmtheplacedNozzleon
Head.
-----
511101 Head Preparation Error(Front)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----
511102 Head Preparation Error(Front)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----
511103 Head Preparation Error(Front)
Because abnormality had occurred while processing the preparation, processing
was interrupted.
-----
511104 Head Preparation Error(Front)
There is a possibility that Nozzle is falling while processing the preparation.
Please
conrmtheplacedNozzleon
Head.
-----
511201 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(L) are detected
simultaneously.
-----
511202 Transfer Section's Preparation Error
Upward movement on PCB Stopper(L) is abnormal.
-----
511203 Transfer Section's Preparation Error
Downward movement on PCB Stopper(L) is abnormal.
-----
511204 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(R) are detected
simultaneously.
-----
511205 Transfer Section's Preparation Error
Upward movement on PCB Stopper(R) is abnormal.
-----
511206 Transfer Section's Preparation Error
Downward movement on PCB Stopper(R) is abnormal.
-----
511207 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AL) are detected
simultaneously.
-----
511208 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AL) is abnormal.
-----
1012-005
4OM-1603
3-119
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
511209 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AL) is abnormal.
-----
511210 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AR) are detected
simultaneously.
-----
511211 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AR) is abnormal.
-----
511212 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AR) is abnormal.
-----
511213 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BL) are detected
simultaneously.
-----
511214 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BL) is abnormal.
-----
511215 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BL) is abnormal.
-----
511216 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BR) are detected
simultaneously.
-----
511217 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BR) is abnormal.
-----
511218 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BR) is abnormal.
-----
511301 Added squeeze error
Added squeeze is not completed.
Open the safety cover and check the placed components. Then, please remove
or revise them.
T4C14
1012-005
4OM-1603
3-120
3. Error IDs and Remedial Procedures : Chap.3
1012-005
3.13 Auto Teaching
Error ID Error Name, Description, Cause, and Remedy
600101 P.C.B. recog camera & beam offset teach.
-----
-----
600102 P.C.B. recog camera & beam offset teach.
Error of Recognition Command response.
-----
600103 P.C.B. recog camera & beam offset teach.
Error of coordinates calculation.
-----
600104 P.C.B. recog camera & beam offset teach.
Error of Data set for XY Beam.
-----
600105 P.C.B. recog camera & beam offset teach.
Error of moving for XY Beam.
-----
600106 P.C.B. recog camera & beam offset teach.
Time-out in XY Beam
-----
600107 P.C.B. recog camera & beam offset teach.
Time-out of communication with recognition.
-----
600108 P.C.B. recog camera & beam offset teach.
Recognition failure of checker mark on parts recognition camera.
-----
600109 P.C.B. recog camera & beam offset teach.
Recognition failure of checker on reference pin.
-----
60010a P.C.B. recog camera & beam offset teach.
Recognition failure of checker mark on glass jig.
-----
600201 Comp. Recog. Camera offset teach.
The glass Jig can not able to be recognized.
Please check that Glass Jig is right on Glass Jig place(Check it because there is
a possibility that nozzle is not on head, or vacuum is not "ON")
600202 Comp. Recog. Camera offset teach.
-----
600203 Comp. Recog. Camera offset teach.
Error of Recognition command response.
-----
600204 Comp. Recog. Camera offset teach.
Error of coordinates calculation.
-----
600205 Comp. Recog. Camera offset teach.
Error when Jig pickup started
-----