4OM-1625-004_w.pdf - 第200页

4OM-1603 3-45 3. Error IDs and Remedial Procedures : Chap.3 1012-005 Error ID Error Name, Description, Cause, and Remedy 427108 Detection of Output conveyor sensor P .C.B. on stop sensor was not detected after movement c…

4OM-1603

3-44

3. Error IDs and Remedial Procedures : Chap.3

1012-005

Error ID Error Name, Description, Cause, and Remedy

426201 positioning conveyor timeout

Placement for input position was not completed within predetermined time.

There is a possibility whether P.C.B. is placed from Input conveyor to Input

positionorisdropped.Pleaseconrm

fromInputtopositioningconveyor.

426202 positioning conveyor timeout

Output from input position was not completed within predetermined time.

There is a possibility whether P.C.B. is placed from Input position to Output or is

dropped.Pleaseconrmfrompositioningto

Outputconveyor.

426203 positioning conveyor timeout

Placement for output position was not completed within predetermined time.

P.C.B. inserted is place in Output position. There is a possibility of it fallen. Please

conrmfromInputtoPositioningconveyor

426204 positioning conveyor timeout

Output from output position was not completed within predetermined time.

There is a possibility whether P.C.B. is placed from Input position to Output or is

dropped.Pleaseconrmfrompositioningto

Outputconveyor.

426301 positioning conveyor Error

Error in positioning conveyor

-----

427101 Detection of Output conveyor sensor

Decrease sensor was detected before starting.

ThereisanindeniteP.C.B.

onOutputconveyor.Pleaseremoveit.

427102 Detection of Output conveyor sensor

Decrease sensor was not detected before starting the movement

P.C.B. to output is not found

1. Please put P.C.B. on Sensor.

2. Thereisapossibility

ofP.C.B.fallen.Conrmtheconveyorwidth.

427103 Detection of Output conveyor sensor

Stop sensor was detected before starting.

ThereisanindeniteP.C.B..

Pleaseremoveit.

427104 Detection of Output conveyor sensor

Stop sensor was not detected before starting.

CannotndP.C.B.tooutput.

1. Is P

.C.B. detected by sensor?

2. There is a possibility that P.C.B. is falling. Please check the width of conveyor.

427105 Detection of Output conveyor sensor

P.C.B. on decrease sensor was detected after movement completion

ThereisanindeniteP.C.B.

onOutputconveyor.Pleaseremoveit.

427106 Detection of Output conveyor sensor

P.C.B. on decrease sensor was not detected after movement completion

Please check whether P.C.B. is detected correctly. Check whether the sensor

doesn’thaveError.

427107 Detection of Output conveyor sensor

P.C.B. on stop sensor was detected after movement completion

Thereis

anindeniteP.C.B.

onOutputconveyor.Pleaseremoveit.

4OM-1603

3-45

3. Error IDs and Remedial Procedures : Chap.3

1012-005

Error ID Error Name, Description, Cause, and Remedy

427108 Detection of Output conveyor sensor

P.C.B. on stop sensor was not detected after movement completion

Please check whether P.C.B. is detected correctly. Check whether the sensor

doesn’thaveError.

427109 Detection of Output conveyor sensor

P.C.B. on output conveyor was detected

Please remove P.C.B. from the conveyor

42710a Detection of Output conveyor sensor

P.C.B. on output conveyor was not detected

Please check whether P

.C.B. is detected correctly.

Checkwhetherthesensordoesn’thave

Error.

42710b Detection of Output conveyor sensor

Stop sensor is not passed during Output operation

The conveyor is stopped before P.C.B. goes through Sensor.

1. Conrmoutputmethod,transitionspeed,

timersetting.

2. Check the connected cable.

42710c Detection of Output conveyor sensor

Disengaged P.C.B. of output conveyor

P.C.B. was removed from Output Conveyor.

Please check the state of it if removing P.C.B. does not happen intentionally.

42710d Detection of Output conveyor sensor

P.C.B. was not inserted into output conveyor

Please Remove P.C.B. inserted.

427201 Output conveyor timeout

Placement was not completed within predetermined time.

There is a possibility that P.C.B. is caught, or dropped from Conveyor.

Please check the above conveyor.

427202 Output conveyor timeout

Output was not completed within predetermined time.

There is a possibility that P.C.B. is caught, or dropped from Conveyor.

Please check the transition with Output Machine.

427301 Output Conveyor Error

Error while output conveyor is moving.

-----

427401 Middle Conveyor Error

Time-out in Placement from Input Machine.

PCB is not placed in Device. Please check Middle Conveyor.

Whether Emergency stop is pressed

2. Whether Safety Cover is open

3. Whether Breaker is falling down

If PCB is on Middle Conveyor, whether remove it, or put it on Input conveyor.

427402 Middle Conveyor Error

Time-out in Output for Output Machine.

PCB is not outputted from Device. Please check Middle conveyor.

1. Whether Emergency stop is pressed

2. Whether Safety Cover is open

Whether Breaker is falling down

4OM-1603

3-46

3. Error IDs and Remedial Procedures : Chap.3

Error ID Error Name, Description, Cause, and Remedy

428001 Error in the communication of P.C.B. transfer

Input Machine signal cutting

A signal of work request for the output machine was cut off while P.C.B. is placing.

1. Please check the transfer method of Input Machine.

2. Check the connected cable.

428002 Error in the communication of P.C.B. transfer

Output Machine signal cutting

A signal of work request for the output machine was cut off while P.C.B. is placing.

1. Please check the transfer method of output Machine.

2. Check the connected cable.

428101 Line PCB transfer error

ime-out of Placement

Line PCB transfer was not completed in prescribed time.

1. There is a possibility that PCB is caught. Please Check the Conveyor.

2. Pleaseconrm

whetherConnect

cableisnormallyconnectedornot.

428201 Transfer Error between Devices

Time-out of starting Input Machine

Could not start Output from Input Machine. Error in Input Machine.

428202 Transfer Error between Devices

Time-out of starting Output Machine

Could not receiver Start Signal from Output Machine. Error in output Machine.

428203 Transfer Error between Devices

Output Machine Error

Error during placement of Output Machine. Transfer will be stopped.

429001 Manual transfer Error

Time-out in Conveyor

The Conveyor didn't stop within predetermined time.

Please

conrmthestateoftransfer

driver.

42a001 Shuttle Conveyor Communication Error

Failed in getting Shuttle Conveyor Control Information.

Communication Error between CPU1 and CPU2 has occurred.

Please restart Machine.

42a101 Detect Suttle Conveyor Sensor in Input side

Decrease Sensor is detected before starting to operate.

Please remove PCB from Shuttle Conveyor.

42a102 Detect Suttle Conveyor Sensor in Input side

Decrease Sensor is not detected before starting to operate.

PCB to insert is not found inner Machine.

1. Please put PCB on Sensor.

2. There is a possibility that PCB drops. Please check out Conveyor width.

42a103 Detect Suttle Conveyor Sensor in Input side

Stop Sensor is detected before starting to operate.

Please remove PCB from Shuttle Conveyor.

1012-005