EN 3.pdf - 第154页
Model DECAN Series Company SAMSUNG TECHWIN Module 3.10 FEEDER V ersion 01 Tit le LOADING MOTOR REPLACEMENT Page 3-10-10 Note 4. After removing the fixing bolts for t he loading motor(2-M3X0. 5), separate the loading moto…
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
LOADING MOTOR REPLACEMENT
Page
3-10-9
Note
[LOADING MOTOR REPLACEMENT]
1. After removing the fixing bolts for the motor cover(2-M2.5X0.45), separate the motor cover from the feeder.
2. After removing the fixing bolts for the right cover(19-M2.5*0.45), separate the right cover from the Feeder.
3. Disconnect the loading motor connector connected to the main board.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
LOADING MOTOR REPLACEMENT
Page
3-10-10
Note
4. After removing the fixing bolts for the loading motor(2-M3X0.5), separate the loading motor from the
Feeder.
5. After replacing it with a new motor, as shown in the figure, firmly attach it to the Motor Gear.
6. Temporarily assemble the loading motor.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.10 FEEDER
Version
01
Title
LOADING MOTOR REPLACEMENT
Page
3-10-11
Note
7. Turn the Motor gear CCW and CW to check if the same force is applied to the motor and then completely fix
the screws.
8. Connect the Motor Cable to the Main Board and assemble the cover.
9. Set it after finishing replacement.
- Home setting, Sensor initialization, Mapping