EN 3.pdf - 第211页

Model DECAN Series Company SAMSUNG TECHWIN Module 3.1 1 HEAD V ersion 01 Tit le Z, R AXIS MOTOR PULLEY R EASSEMBL Y (L2) Page 3-1 1-51 Note [Z, R AXIS MOTOR PULLEY REASSEMBL Y (L2)]  Z axis Motor Pulley 1. Separate the …

100%1 / 355
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
Z, R AXIS MOTOR PULLEY REASSEMBLY (F2)
Page
3-11-50
Note
2. Separate the Cable from the Motor and separate the Motor Plate by releasing the fixing bolts.
3. Remove the fixing bolts for the Pulley to separate it.
4. Assemble the Pulley into the Motor as follows.(fixing torque : 4kgf.cm)
5. Assemble the Pulley in the reverse order of assembly and adjust the tension by referring to the R axis Belt
Tension guides.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
Z, R AXIS MOTOR PULLEY REASSEMBLY (L2)
Page
3-11-51
Note
[Z, R AXIS MOTOR PULLEY REASSEMBLY (L2)]
Z axis Motor Pulley
1. Separate the Air Pressure Tube and the Cable connected to the Air Module of the Air Head.
2. Release the fixing bolts for the Air Module and separate the Air Module.
3. Separate the Coil Tube and the Joint Assy.
Model
DECAN Series
Company
SAMSUNG TECHWIN
Module
3.11 HEAD
Version
01
Title
Z, R AXIS MOTOR PULLEY REASSEMBLY (L2)
Page
3-11-52
Note
4. Separate the Spline and the Sensor Dog.
5. Separate the Cable from the Motor and separate the Z axis Motor.
6. Separate the Pulley by releasing the Fixing Set Screws.