1OM-1626-001_w.pdf - 第108页

1OM-1610 2-9 2. Operation Screen : Chap.2 2.4. Recognition Window When the [Chng Scrn] button is pressed on the main menu bar, the touch panel indication is changed to "Recognition Image" window. 2.4.1 Recognit…

100%1 / 227
1OM-1610
2-8
2. Operation Screen : Chap.2
[2] [F2 READY] Button
When the [F2 READY] button is pressed, the feeder ready switches on the
main machine are turned ON/OFF, and feeder clamp holding bar is locked/
unlocked.
Note
The moving up/down operation of the feeder base is unavailable. If
needed, perform it using the feeder ready switches on the main machine.
Reference
Refer to "2.3 Feeder Ready Switches and Cover Lock Switches" in Chapter
1, for the feeder ready switches on the main machine.
[3] Stop Mode
[Product] Button
When this button is pressed, after the production of the PCB which is in
the course of the production, is completed, the PCB is discharged and the
automatic operation is stopped.
[Cycle] Button
When this button is pressed, after the component placement operation on the
PCB which is in the course of the production, is completed, the automatic
operation is stopped.
[4]
Cancel Run
[Cancel] Button
When the machine status is turned to "Pause", the [Cancel] button is
displayed. When the [Cancel] button is pressed, the "Pause" status is
cancelled and the machine is in the "Stop" mode.
[5] [ZERO] Button
After the [ZERO] button is pressed and within 10 seconds, the [START]
button on the operation panel is pressed, all the axes are zeroed.
0911-001
1OM-1610
2-9
2. Operation Screen : Chap.2
2.4. Recognition Window
When the [Chng Scrn] button is pressed on the main menu bar, the touch panel
indication is changed to "Recognition Image" window.
2.4.1 Recognition Window in Normal Operation
When the "Recognition" window is displayed in the "RUN" mode, the following
window appears.
[1]
[3]
[2]
F1B6-2
[1] Recognition Image Display Domain
The recognition images (camera images) in each block are displayed.
The multi- (4 beams simultaneously) or single (1 beam) display can be
selected.
Selecting the recognition image to be displayed, changes the recognition
image in the recognition image display domain.
0911-001
1OM-1610
2-10
2. Operation Screen : Chap.2
[2] Displayed Image Operation Buttons
The following buttons change the mode for the enlargement or movement
operations, for the image displayed in the [1] Recognition Image Display
Domain.
Button :
Normal Operation Mode
Button :
Image Enlargement Mode
After changing to the image enlargement mode using the
button (the shape of the pointer is changed to ), when
the image to be enlarged is touched, or the left button of the
track ball is clicked on the image, the image is enlarged from
the pointer position as the center.
When the image is to be enlarged with its position xed,
place the pointer on the center of the image before the
enlargement operation.
Button :
Image Reduction Mode
After changing to the image reduction mode using the
button (the shape of the pointer is changed to
) when the
image to be reduced is touched, or the left button of the track
ball is clicked on the image, the image is reduced from the
pointer position as the center.
When the image is to be reduced with its position xed,
place the pointer on the center of the image before the
reduction operation.
Button :
Image Movement Mode
After changing to the image movement mode using the
button (the shape of the pointer is changed to
mark),
drag the image to be moved (pressing the left button of the
track ball, turn the ball to move the image).
0911-001