1OM-1626-001_w.pdf - 第193页
1OM-1610 5-12 1. Specications : Chap.5 091 1-001 Item Description 19. PEC Recognition V isual Field Approx. 12 × 12 mm W indow Size Max. 10.0 × 10.0 mm Recognition (Process) T ime Approx. 0.06 seconds / mark (including …
1OM-1610
5-11
1. Specications : Chap.5
0911-001
Item Description
16. Memory Capacity
of Pattern
Program Data
Maximum Number of Steps : 20,000 steps/model (For repetitive patterns)
Maximum Memorized Number of Models : 24 models
Note :
The above numbers are limited according to the capacity of the
pattern program data per model.
17. Input System and
Output System of
Pattern Program
Data
•
Operated using the touch screen on the main machine and edited using the
keyboard/pointing device (Option).
•
Pattern program data can be edited with the network terminal (Option).
•
Data can be entered through the local area network (Ethernet) running from
the data storage device of the network terminal (Option).
•
Data
Transfer to Storage of Network Terminal (Option).
18. Component
Recognition
V
isual Field
φ
62 mm
The dimension in Y direction must be 46.7 mm.
Y (direction)
F 62
Unit : mm
Photoimage Front Lighting System
(Direct Recognition of Component by Front Lighting)
Note :
Some limitation is imposed, depending on the types of
components.
Back Lighting System
(Recognition by Component Silhouette)
Note :
Some limitation is imposed, depending on the types of
components.
In the back lighting system, specied nozzle are
required for the middle-size odd-shaped components
and the multifunctional nozzle on the multifunctional
head.
For the Back Lighting System, the static image is shot
using the camera.
T1E1-11
1OM-1610
5-12
1. Specications : Chap.5
0911-001
Item Description
19. PEC Recognition Visual Field Approx. 12
×
12 mm
Window
Size
Max. 10.0
×
10.0 mm
Recognition
(Process)
Time
Approx. 0.06 seconds / mark
(including the time to capture an image)
Photoimage Front Lighting System
(Recognition of Fiducial Mark by Front Lighting)
("Normal" or "Reverse" can be selected for each mark.)
20. Fiducial Marks Refer to "Fiducial Marks" for details.
21. Air Supply Supply
Pressure
0.45 to 0.69 MPa (4.6 to 7 kgf/cm
2
)
Set Pressure 0.45 MPa (4.6 kgf/cm
2
)
Note :
Min. 0.4 MPa (4.1 kgf/cm2) of air is necessary for
operation.
•
Use the dry and clean air as follows
Moisture : Dew Point
−
17
°
C or lower (Atmospheric Pressure)
Oil
: 0.1 mg/m
3
or less (ANR)
Dust : Solid Material 0.01
µ
m or less
22. Air Consumption Approx.
30 L/min (during automatic operation)
Approx. 110 L/min (when one feeder base moves up and down)
23. Vacuum Pressure
−
93 kPa (70 cmHg)
T1E1-12
1OM-1610
5-13
1. Specications : Chap.5
0911-001
Item Description
24. Environmental
Condition
Temperature : 20
±
10
°
C
Humidity : 30 to 80 % (Avoid dew condensation)
Note :
When the ambient temperature rises more than the surface of the
machine, dew condensation might occur under the condition described
below.
Note that dew condensation may cause the machine to break down.
Condition of Dew Condensation
Dew condensation might occur when the difference (based on
"Humidity (%)") between the ambient and surface temperatures of the
machine reach the values or more in the table below
.
Humidity (%)
Differences between Ambient and Surface
Temperatures of Machine
(Ambient Temperature > Surface Temperature)
80 3
°
C or more
70 6
°
C or more
60 8
°
C or more
50 10
°
C or more
40 14
°
C or more
30 18
°
C or more
25. Power Supply 200
±
20 V AC, 3-Phase, 50/60 Hz
Connected to the power supply unit (3-phase 3-wire system)
(The grounding cable should be connected to the PE terminal).
26. Apparent Power Approx. 6.1 kVA (Max.)
27.
Power
Consumption/
Hour
Approx. 1.22 kWh
28. Dimensions Approx. : 1,280 (Width) mm (Including Input/Output Conveyor)
×
1,900 (Depth) mm
(Including Bank Feeder Change Cart)
×
1,450 (Height) mm
(1,910 mm : Including
Tower)
29. Mass Approx. 1,700 kg
(excluding. the Bank Feeder Change Carts and the tape feeders)
30. Environmental
Requirements
for Bank Feeder
Change Cart
Floor Gradient : 10/1000 or less
Note :
The oor should be hard enough for the casters of the cart to move
smoothly.
T1E1-13