1OM-1626-001_w.pdf - 第138页

1OM-1610 3-19 2. Component Replenishment : Chap.3 2.3 Component Replenishment with Splicing Function The splicing function makes it possible to replenish the supply of taped components without stopping the automatic oper…

100%1 / 227
1OM-1610
3-18
2. Component Replenishment : Chap.3
(6) Set the number of reloaded components.
•
Replenishment of New Tape
Press the [Comp.Reld] button.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
•
Replenishment of Used Tape
(when the number of taped components differs from the number of
componentsspeciedinthecomponentlibrarydata)
Press the [Cop Rem] button.
The "Cop Rem" window opens.
Enter the number of reloaded components.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
(7) Press the [START] button on the operation panel.
The automatic operation is re-started.
0911-001
1OM-1610
3-19
2. Component Replenishment : Chap.3
2.3 Component Replenishment with Splicing Function
The splicing function makes it possible to replenish the supply of taped
components without stopping the automatic operation.
Notice
A splicing tape and a tape cutting jig are also required for splicing.
When the [Enable] button is selected in the "Stop Mode" group box of the
"Splicing Mode" tab sheet and the specied condition is fulled, a "Machine
Information (Alarm for Splicing)" window opens.
F1C17
Procedure
(1) Check the contents of the machine information and press the [OK] button.
The "Machine Information" window closes.
(2) Press the [Comp-Reld] button on the submenu bar of the "Comp-Reld"
window to open the "Comp.Reload" window.
0911-001
1OM-1610
3-20
2. Component Replenishment : Chap.3
F1C18
(3) Press the "Fdr. No." button which corresponds to the feeder No. (FDR-No. to
be set ready for splicing) displayed in the "Machine Information (Alarm for
Splicing)" window and check the scope of the component data.
(4) Perform the splicing operation and replenish the feeder with components.
Reference
Refer to the instruction manuals of the tape cutting jig and the splicing
tape for detailed information on the splicing work.
(5) Follow the step below to set the replenished components.
•
When a new tape is spliced, press the [Spl Comp Rem] button.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components
.
•
Splicing of Used Tape
(when the number of taped components differs from the number of
componentsspeciedinthecomponentlibrary
data)
Press the [Spl Comp Rem] button. The "Spl Comp Rem" window opens.
Enter the number of reloaded components.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
0911-001