1OM-1626-001_w.pdf - 第158页

1OM-1610 4-1 1. Outline of Program Change Operation : Chap.4 091 1-001 1. Outline of Program Change Operation Follow the steps below to perform a program change operation. Preparation for Program Change Operation Program…

100%1 / 227
1OM-1610
0911-001 4-B
1OM-1610
4-1
1. Outline of Program Change Operation : Chap.4
0911-001
1. Outline of Program Change Operation
Follow the steps below to perform a program change operation.
Preparation for Program
Change Operation
Program Change
Operation
Confirmation of Placement
2.1 Preparation for Component Library
2.2 Creation of Pattern Program for Production Model
2.3 Registration of Pattern Program for Production Model
2.4 Preparation for Feeders
3.1 Selection of Run Mode
3.2 Selection of Operation Mode
3.3 Setups for PCB Support Pins and Conveyor Width
3.3.1 Collection of PCB Support Pins and Setup
Operation of Conveyor Width
3.3.2 Attachment of PCB Support Pins
3.3.3 Notes on Attachment / Detachment of
PCB Support Pins
3.4 Preparation for Vacuum Nozzles
3.5 Confirmation of PCB Transfer and Positioning
4.1 Setting of Operation Mode
4.2 Confirmation of Component Placement
Flow of Program Change Operation for Production Model
F1D1
1OM-1610
4-2
2. Preparation for Program Change Operation : Chap.4
0911-001
2. Preparation for Program Change Operation
2.1 Preparation for Component Library
Library data must be created for new components when there is no component
library data required to create a pattern program.
Note
(a) Refer to "Chapter 4 Component Library" in "Volume 2: Programming and
Machine Data" for window navigation.
(b) Refer to another instruction manual "Component Library (SIGMA-G4/G5)"
for how to create the data.
2.2 Creation of Pattern Program for Production Model
A pattern program is required for the automatic operation of the machine.
Reference
Refer to "Chapter 3 Pattern Program" in "Volume 2: Programming and Machine
Data" for details.
2.3 Registration of Pattern Program for Production Model
Pattern programs and component library data must be transferred from the
network terminal (option) to the machine.