1OM-1626-001_w.pdf - 第66页

1OM-1610 2. Name and Function of Each Section : Chap.1 1-9 091 1-001 Short Appendix : Cover Lock Switch Switch ON LED ON Switch ON LED OFF Cover Lock Switches Switch Status Machine Status LED ON "Operation of Cover …

100%1 / 227
1OM-1610
1-8
2. Name and Function of Each Section : Chap.1
0911-001
Short Appendix : Feeder Ready Switches
Switch ON (Short Push)
LED OFF
(1)
S witch Operations and Tr ansition of Machine Condition
[Ordinary Operations with Machine in "STOP" (or "PAUSE") Mode]
Feeder Ready Switches
Switch Status Machine Status
LED ON
Feeder Clamp Holding Bar :
Locked
Power Supply to Feeders :
:
Switch Status Machine Status
LED OFF
Feeder Base
"Replacement and Setup Operations of Feeder Bank
Lower Limit
Carriage Cart" Possible
Feeder
Clamp Holding Bar :
Unlocked
Power Supply ( 24
V) to Feeders :
Intercepted
Feeder
Attachment/Detachment Operation :
Possible
Power Supply to Connector for
feeder Base Installed on Main Machine
:
Intercepted
Note
During the transition of the machine status along with the above-described
switch operations, the [FEEDER READY] switches flicker, regardless of a
LED lighting pattern such as "ON" to "OFF", "OFF" to "ON", or "OFF" to
"OFF".
Switch ON
(Short Push)
Powered
Locked
Feeder Base Drop Prevention
:
Unlocked
Feeder Base Drop Prevention
Feeder
Attachment/Detachment Operation :
Impossible
LED OFF
"Operation of Feeder Ready" Permitted by Operator
1OM-1610
2. Name and Function of Each Section : Chap.1
1-90911-001
Short Appendix : Cover Lock Switch
Switch ON
LED ON
Switch ON
LED OFF
Cover Lock Switches
Switch Status Machine Status
LED ON
"Operation of Cover Lock" Permitted by Operator
Electromagnetic Locks of
Transparent Covers :
Locked
(Transparent Covers Opening
Impossible)
Switch Status Machine Status
LED OFF
"Operation of Cover Lock" Rejected by Operator
Electromagnetic Locks of
Transparent Covers :
Unlocked
(Transparent Covers Opening /
Closing Possible)
1OM-1610
1-10
2. Name and Function of Each Section : Chap.1
0911-001
2.4 Cover Section
DANGER
There are strong motorized and high-voltage areas
inside the machine. Special caution should be paid
not to touch them.
Doing otherwise will cause personal injury (serious
accident).
•
Only qualified maintenance personnel should
detach the covers.
•
The machine should be operated with the covers
being attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to close the transparent covers (door
type) before operating the machine.
•
Do not disengage the interlock mechanism of the
transparent covers (door type).
The transparent covers and safety doors are mounted on the upper side of the
beam unit and around the base respectively, so that any part of your body, clothes
or object is not in contact with the moving section inside the machine, to prevent
any danger during the automatic operation.
Safty Cover (located around frame)
Machine Front Side
Storage Cover of
Electrical Part Storage Box
(located on the lower area
of both conveyor ends)
Cover Lock Switch
(Stage ready Switch)
Transparent Cover
(Door Type, Located over the beams)
Transparent Cover
(Door Type, Located over the beams)
Safty Cover
(located around frame)
F1A6