1OM-1626-001_w.pdf - 第117页

1OM-1610 2-18 4. Exiting from the System Program : Chap.2 091 1-001 4.3 Locking the Power Breaker Notice When the machine is not to be used for a long period of time, lock the power breaker with the padlock. Procedure (1…

1OM-1610

2-17

4. Exiting from the System Program : Chap.2

0911-001

(2) Press the [Shutdown] button in the "TOP" window.

The conrmation dialog box opens, asking the operator if the power to the

machine must really be shut down or not.

F1B11

(3) When the [Yes] button is pressed, the power to the machine is turned off.

When the [No] button is pressed, the shutdown operation is canceled and the

dailog box closes.

(4) Set the lever of the power breaker to the "OFF" position. The lever of the

power breaker is located on the front side of the machine.

F1B12

1OM-1610

2-18

4. Exiting from the System Program : Chap.2

0911-001

4.3 Locking the Power Breaker

Notice

When the machine is not to be used for a long period of time, lock the

power breaker with the padlock.

Procedure

(1) Pull out the lock lever of the power breaker in Direction A (indicated in the

gure below).

Be sure not to release your hand from the lock lever. Otherwise, the lock

lever will pull back in place.

(2) Engage the shackle of the padlock through the lock slot and lock the crank.

Lock Lever

Padlock

Locking the Power Breaker

F1B13

CAUTION

The padlock key should be kept in such a way that

nobody except the personnel in charge of maintenance can

supervise it.

1OM-1610

0911-001 3-A

Chapter 3

Outline of Automatic Operation

This chapter describes the procedures of daily automatic operations and

component replenishment.

1. Automatic Operation

2. Component Replenishment

3. PCB Replenishment

4. Stop, Interruption, and Restart of Operation

5. Running-In Operation

Chapter 3 Outline of Automatic Operation