1OM-1626-001_w.pdf - 第137页

1OM-1610 3-18 2. Component Replenishment : Chap.3 (6) Set the number of reloaded components. • Replenishment of New Tape Press the [Comp.Reld] button. Check the remaining number of components in the feeder list and conr…

100%1 / 227
1OM-1610
3-17
2. Component Replenishment : Chap.3
2.2 Intentional Component Replenishment during Automatic
Operation
Procedure
(1) Press the [STOP] button on the operation panel and stop the production
temporarily.
(2) Detach the feeder in short of components from the feeder base.
(3) Load the feeder with new components and attach it to the feeder base.
(4) Press the [Comp.Reld.] button in the "Product" menu. The "Comp.Reload"
window opens.
F1C16
(5) Press the "Fdr No." button corresponding to component-replenished feeder
base.
0911-001
1OM-1610
3-18
2. Component Replenishment : Chap.3
(6) Set the number of reloaded components.
•
Replenishment of New Tape
Press the [Comp.Reld] button.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
•
Replenishment of Used Tape
(when the number of taped components differs from the number of
componentsspeciedinthecomponentlibrarydata)
Press the [Cop Rem] button.
The "Cop Rem" window opens.
Enter the number of reloaded components.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
(7) Press the [START] button on the operation panel.
The automatic operation is re-started.
0911-001
1OM-1610
3-19
2. Component Replenishment : Chap.3
2.3 Component Replenishment with Splicing Function
The splicing function makes it possible to replenish the supply of taped
components without stopping the automatic operation.
Notice
A splicing tape and a tape cutting jig are also required for splicing.
When the [Enable] button is selected in the "Stop Mode" group box of the
"Splicing Mode" tab sheet and the specied condition is fulled, a "Machine
Information (Alarm for Splicing)" window opens.
F1C17
Procedure
(1) Check the contents of the machine information and press the [OK] button.
The "Machine Information" window closes.
(2) Press the [Comp-Reld] button on the submenu bar of the "Comp-Reld"
window to open the "Comp.Reload" window.
0911-001