MAN00000772_SI-G200BB_SVCPDFA.pdf - 第164页

HLGB-10105-01 Calibration Data Load   <When the indicated jig No is different form jig No to be use d> Press the Use another jig button.

HLGB-10105-01

Calibration Data Load

[Necessary jigs]

• Calibration data FD

[Procedure]

< When performing calibration for the front head >

If there’s no description in Calib.ini, refer to the following.

Same value as MOUNT_HEIGHT in NOZZLE_S_TYPE_G = head.ini

A value obtained by subtracting “3” from MOUNT_HEIGHT in NOZZLE_T_TYPE_G = head.ini

A value of H of [FixedCamera] POS_XYH in FIXED_INSP_HEIGHT = head.ini

Use a FD having a same No as the ball point

jig.

HLGB-10105-01

Calibration Data Load



<When the indicated jig No is different

form jig No to be used>

Press the Use another jig button.

HLGB-10105-01

Calibration Data Load

After loading jig data, check the following description in Calib.ini.

・ Should be same value as MOUNT_HEIGHT in NOZZLE_S_TYPE_G = head.ini.

・ Should be a value obtained by subtracting “3” from MOUNT_HEIGHT in NOZZLE_T_TYPE_G =

head.ini .

・ Should be a value of H of [FixedCamera] POS_XYH in FIXED_INSP_HEIGHT = head.ini.

Press the Use the same jig button.

When performing calibration again, use the

previously used jig wherever possible.

“

Perform calibration sequentially from the

upper on this menu screen.

Any buttons displayed in gray become effective

by completing calibration items on the above.